0.7500 in. (3/4) Cutter Diameter x 0.0300 in. Radius x 0.2500 in. (1/4) Width 10 Flute AlTiN Coated Carbide Corner Radius Reduced Shank Keyseat Cutter

Item Code: 905270-C3

0.7500 in. (3/4) Cutter Diameter x 0.0300 in. Radius x 0.2500 in. (1/4) Width 10 Flute Carbide Corner Radius Reduced Shank Keyseat Cutter

Item Code: 905270

0.5000 in. (1/2) Cutter Diameter x 0.1250 in. (1/8) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Square Keyseat Cutter

Item Code: 22660

0.3750 in. (3/8) Cutter Diameter x 0.0930 in. (3/32) Width x 0.3750 in. (3/8) Neck Length 8 Flute AlTiN Coated Carbide Square Deep Keyseat Cutter

Item Code: 958950-C3

0.0937 in. (3/32) Radius x 0.5000 in. (1/2) Cutter Diameter 4 Flute AlTiN Coated Carbide Concave Radius End Mill

Item Code: 32806-C3

0.1250 in. (1/8) Cutter Diameter x 0.0620 in. (1/16) Width x 0.1870 in. (3/16) Neck Length 4 Flute Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 962962

0.2500 in. (1/4) Cutter Diameter x 0.0400 in. Width x 0.3750 in. (3/8) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22340-C3

0.1250 in. (1/8) Radius x 0.6250 in. (5/8) Cutter Diameter 4 Flute AlTiN Coated Carbide Concave Radius End Mill

Item Code: 32808-C3

0.1250 in. (1/8) Shank Diameter x 30 Deg. Included 2 Flute TiB2 Coated Carbide Marking Cutter For Non-Ferrous

Item Code: 902915-C8

0.2500 in. (1/4) Cutter Diameter x 0.2160 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 39116

0.1250 in. (1/8) Shank Diameter x 0.0100 in. Flat x 30 Deg. Included 1 Flute Carbide Tipped Engraver

Item Code: 25210-HARVEY

0.5000 in. (1/2) Cutter Diameter x 0.0550 in. Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22625-C3

0.1250 in. (1/8) Cutter Diameter x 0.0310 in. (1/32) Width x 0.0620 in. (1/16) Neck Length 6 Flute AlTiN Coated Carbide Square Deep Keyseat Cutter

Item Code: 982531-C3

0.3125 in. (5/16) Cutter Diameter x 60 Deg. Included 3 Flute AlTiN Coated Carbide Pointed Dovetail Cutter

Item Code: 995220-C3

0.5000 in. (1/2) Cutter Diameter x 60 Deg. Included 3 Flute AlTiN Coated Carbide Pointed Dovetail Cutter

Item Code: 995232-C3

0.0930 in. (3/32) Cutter Diameter x 0.0250 in. Width x 0.1410 in. Neck Length 4 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 28225-C3

0.3750 in. (3/8) Cutter Diameter x 0.0100 in. Radius x 90 Deg. Included 3 Flute Carbide Tip Radius Dovetail Cutter

Item Code: 16824-HARVEY

0.3750 in. (3/8) Cutter Diameter x 0.1250 in. (1/8) Width x 0.3120 in. (5/16) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 946905-C3

0.2500 in. (1/4) Cutter Diameter x 0.0780 in. (5/64) Width x 0.7500 in. (3/4) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 43978-C3

0.3750 in. (3/8) Cutter Diameter x 0.0156 in. (1/64) Radius x 0.5630 in. Neck Length 6 Flute AlTiN Coated Carbide Full Radius Keyseat Cutter

Item Code: 68415-C3

0.1875 in. (3/16) Cutter Diameter x 0.0350 in. Width x 0.2810 in. (9/32) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22235-C3

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 20 Deg. Included 2 Flute AlTiN Coated Carbide Tip Radius Dovetail Cutter

Item Code: 16406-C3

0.1562 in. (5/32) Cutter Diameter x 0.0400 in. Width x 0.2500 in. (1/4) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 69440-C3

1.0000 in. (1) Cutter Diameter x 0.0310 in. (1/32) Width 12 Flute AlTiN Coated Carbide Square Reduced Shank Deep Keyseat Cutter

Item Code: 982005-C3

0.5000 in. (1/2) Cutter Diameter x 0.0200 in. Radius x 0.2500 in. (1/4) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Corner Radius Keyseat Cutter

Item Code: 933780