1 Inch 6-Flute Single End Roughing Endmill

Item Code: 71012

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide Coolant Through Combination Feed & HEM 5 Flute TPLUS Coated Endmill

Item Code: 86431-HELICAL

0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29540

1/4 in. x 1/4 in. x 1/2 in. x 2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill

Item Code: I4S0250T050S TIALN

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 4.0000 in. (4) Overall Length x 1.5000 in. (1-1/2) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82700-HELICAL

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 1.0000 in. (1) Major Radius x 0.0300 in. Corner Radius x 0.5000 in. (1/2) Length of Cut x 3.0000 in. (3) Overall Length Carbide 4 Flute Tplus Coated Lens Multi-Axis Finisher Endmill

Item Code: 86369

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29516

0.3750 in. (3/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29524

0.3750 in. (3/8) Cutter Dia. x 0.3750 in. (3/8) Shank Dia. x 0.7500 in. (3/4) Major Radius x 0.0200 in. Corner Radius x 0.3750 in. (3/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Lens Multi-Axis Finisher Endmill

Item Code: 86368-HELICAL

6.00 mm Cutter Diameter x 6.00 mm Shank Diameter x 0.480 mm Radius x 6.00 mm Length of Cut x 75.00 mm Overall Length x 36.00 mm Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82707-HELICAL

0.7500 in. (3/4) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC20748

1/2 in. Diameter 2 in. Length of Cut x 4 in. Overall Length 4 Flutes Chamfer Fine Pitch Extra Long GMX-35 Coated Rougher Endmill

Item Code: CEMR12CL4

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length x 1.1250 in. (1-1/8) Reach Carbide 4 Flute Tplus Coated High Feed Endmill

Item Code: 83730

1/2 in. Diameter x 1 in. Length of Cut x 3 in. Overall Length 4 Flutes Chamfer GMS2 Coated Rougher Endmill

Item Code: GMKD12CH4

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.3125 in. (5/16) Length of Cut x 2.0000 in. (2) Overall Length Carbide 4 Flute Tplus Coated Combination Feed & HEM Endmill

Item Code: 84471

3/8 in. Diameter x 7/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide 4 Flutes GMS2 Coated Rougher/Finisher Endmill

Item Code: GMHX38R4015

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 4.0000 in. (4) Overall Length x 0.7500 in. (3/4) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82699-HELICAL

0.7500 in. (3/4) Cutter Diameter x 2.5000 in. (2-1/2) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

Item Code: TC20648

0.7500 in. (3/4) Cutter Diameter x 2.5000 in. (2-1/2) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29648

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 0.6250 in. (5/8) Length of Cut 4 Flute Carbide Corner Radius Rougher Endmill

Item Code: TC29712

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 7.0000 in. (7) Overall Length x 4.0000 in. (4) Reach Carbide 5 Flute Tplus Coated High Feed Endmill

Item Code: 83723-HELICAL

0.1875 in. (3/16) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29312

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 20° Helix Angle, 0.0197 chamfer

Item Code: 3189-12.70

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0200 in. Radius x 0.2500 in. (1/4) Length of Cut x 3.0000 in. (3) Overall Length x 1.5000 in. (1-1/2) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

Item Code: 82698

3/4 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length x 0.09 in. Radius Carbide 4 Flutes GMS2 Coated Rougher/Finisher Endmill

Item Code: GMHX34R4090