- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
1/8 (.1250) Solid Carbide, Straight Flute Series 1400 General Purpose Reamer
- Item Code: 14511
- Brand: Fullerton
- Unit Size: 1
Description
Fullerton Tool provides these straight flute, right hand cutting reamers based on common fractional, metric, wire and letter sizes. Fullerton Tool's 1400 reamers are known for tight tolerances, great quality and performance.
Features
Back To Top- Straight Flutes
- Number of Flutes Varies by Diameter
- Carbide Reamers
- Manufactured Using Female and Male Centers for Improved Concentricity
- Male centers on items up to .1124�� (2.86mm)
- 45� lead angle
- Short and standard lengths
- Standard Uncoated
- Metric and Inch Based Tools
- Cutter Diameter up to .250��: +0.0002�� -.0000�� / over: .2501��: +0.0003�� -.0000�� (or up to 6.35mm: +0.005mm -.000mm / over 6.351mm: +0.008mm -.000mm)
- Shank Diameter: +.0005�� -.0005�� (+.013mm -.013mm)
- Steel Shanks on Items over .2812�� Cutting Diameter and 4.000�� in Length
Tech Specs
Back To Top| Flute Length (Inch) | 7/8 |
|---|---|
| Decimal Diameter | 0.1250" |
| End Type Character Designation | C |
| Length Designator | SD |
| Series | 1400 |
| Shank Diameter (mm) | 2.78 |
| Weldon Flat | No |
| Coolant Through | No |
| Overall Length Fractional | 3-1/2" |
| Center Type | Female |
| Direction of Cut | RH |
| Flute Length (Decimal Inch) | 0.8750 |
| Overall Length Decimal | 3.5000" |
| Overall Length Metric | 88.90 mm |
| Coating/Finish | None |
| Fractional Diameter | 1/8" |
| Material | Solid Carbide |
| Brand | Fullerton |
| Metric/Inch | Inch |
| Number of Flutes | 4 |
| Point End Type | 45° Cutting Chamfer |
| Chamfer Angle (Degrees) | 45 |
| Shank Diameter (Decimal Inch) | 0.1094 |
| End Type | SE |
| Flute Length (mm) | 22.23 |
| Length | Standard |
| Metric Diameter | 3.18 mm |
| Shank Diameter (Inch) | 7/64 |