- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
17/64 (.2656) Solid Carbide, Straight Flute Series 1400 General Purpose Reamer
- Item Code: 14520
- Brand: Fullerton
- Unit Size: 1
Description
Fullerton Tool provides these straight flute, right hand cutting reamers based on common fractional, metric, wire and letter sizes. Fullerton Tool's 1400 reamers are known for tight tolerances, great quality and performance.
Features
Back To Top- Straight Flutes
- Number of Flutes Varies by Diameter
- Carbide Reamers
- Manufactured Using Female and Male Centers for Improved Concentricity
- Male centers on items up to .1124�� (2.86mm)
- 45� lead angle
- Short and standard lengths
- Standard Uncoated
- Metric and Inch Based Tools
- Cutter Diameter up to .250��: +0.0002�� -.0000�� / over: .2501��: +0.0003�� -.0000�� (or up to 6.35mm: +0.005mm -.000mm / over 6.351mm: +0.008mm -.000mm)
- Shank Diameter: +.0005�� -.0005�� (+.013mm -.013mm)
- Steel Shanks on Items over .2812�� Cutting Diameter and 4.000�� in Length
Tech Specs
Back To Top| Decimal Diameter | 0.2656" |
|---|---|
| Flute Length (mm) | 38.10 |
| Overall Length Fractional | 6" |
| Point End Type | 45° Cutting Chamfer |
| Chamfer Angle (Degrees) | 45 |
| Length Designator | SD |
| Overall Length Decimal | 6.0000" |
| Weldon Flat | No |
| Metric Diameter | 6.75 mm |
| Direction of Cut | RH |
| Fractional Diameter | 17/64" |
| Shank Diameter (Inch) | 1/4 |
| Center Type | Female |
| Coolant Through | No |
| End Type Character Designation | C |
| Length | Standard |
| Material | Solid Carbide |
| Series | 1400 |
| Shank Diameter (mm) | 6.35 |
| Coating/Finish | None |
| Flute Length (Decimal Inch) | 1.5000 |
| Flute Length (Inch) | 1-1/2 |
| Brand | Fullerton |
| End Type | SE |
| Metric/Inch | Inch |
| Number of Flutes | 6 |
| Overall Length Metric | 152.40 mm |
| Shank Diameter (Decimal Inch) | 0.2500 |