- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
25/64 Inch Diameter, Jobber Drill, 2 flutes, HSS, Steam Oxide Coated, Morse taper Shank, 118° Point, Right Hand Cut
- Item Code: 245-9.920
- Brand: Guhring
- Unit Size: 1
Description
A Morse Taper Shank drill incorporates a standardized taper shank design that is used in tapered drill chucks. The Morse Taper was invented by Stephen A. Morse (also the inventor of the twist drill) in the mid-1860s. Morse Tapers come in eight sizes identified by number between 0 and 7. Often this is abbreviated as MT followed by a digit, for example a Morse taper number 4 would be MT4. The MT2 taper is the size most often found in drill presses up to 1/2'' capacity.
Tech Specs
Back To Top| Cutting Direction | Right Hand |
|---|---|
| Number of Flutes | 2 |
| Flute Length (mm) | 87 |
| Point Angle | 118° |
| Length of Cut (mm) | 72.12 |
| Metric Diameter | 9.92 mm |
| Series | 245 |
| Brand | Guhring |
| Shank Type | 1MT |
| Fractional Diameter | 25/64" |
| Material | High Speed Steel |
| Coating/Finish | Steam Oxide |
| Decimal Diameter | 0.3906" |
| Drilling Depth | Jobber |
| Overall Length (mm) | 168 |