- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0118 chamfer
- Item Code: 3097-9.52
- Brand: Guhring
- Unit Size: 1
Description
Guhring offers a variety of high performance carbide roughing designs. The Rough-Tech ALU (GS100 A is designed specifically for aluminum and aluminum alloy milling, solid or coolant fed, with a coarse tooth profile. The Aero-Rough (RS100 U/F) incorporates a truncated roughing tooth profile for maximum efficiency in aerospace alloys such as stainless steel, titanium and Inconel. The Rough-tech 48/56 (GS100 U/H) is designed for roughing materials up to 48 HRC and 56 HRC respectively and a coolant
Features
Back To Top- Increased tool life in comparison to milling cutters with round knuckle-type teeth
- Increased feed rate thanks to new edge wear protection
- Improved workpiece surface finish
- Reduced power requirement compared to smooth cutting milling cutters
Tech Specs
Back To Top| Length of Cut | 7/8 |
|---|---|
| Shank Type | HA |
| Shank Diameter | 3/8 |
| Brand | Guhring |
| Overall Length (mm) | 63.5 |
| Series | 3097 |
| Coating/Finish | FIREX |
| Shank Dia (decimal) | 0.3750 |
| Shank Diameter (mm) | 9.525 |
| Decimal Diameter | 0.3750" |
| Material | Solid Carbide |
| Metric Diameter | 9.525 mm |
| Number of Flutes | 4 |
| Overall Length (decimal) | 2.5000 |
| Coolant | without |
| Fractional Diameter | 3/8" |
| Helix Angle | 30° |
| Overall Length | 2-1/2 |
| Chamfer Decimal | 0.0118 |
| Chamfer Metric | 0.3 |