- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
12mm Diameter Endmill, 12mm shank, 3 flutes, 22mm Length of Cut, Carbide, with Coolant, HB Shank, 83mm Overal Length, 30° Helix Angle, 0.5 chamfer (mm)
- Item Code: 3364-12.000
- Brand: Guhring
- Unit Size: 1
Description
Slot and pocket milling often creates chip evacuation problems, especially on vertical machining centers. Re-cutting chips can cause end mill failure.
Coolant-through end millshelp evacuate chips from the cutting zone. This eliminates the problem or re-cutting chips.
Guhring offers a variety of high performance carbide roughing designs. The Rough-Tech ALU (GS100 A is designed specifically for aluminum and aluminum alloy milling, solid or coolant fed, with a coarse tooth profile. The Aero-Rough (RS100 U/F) incorporates a truncated roughing tooth profile for maximum efficiency in aerospace alloys such as stainless steel, titanium and Inconel. The Rough-tech 48/56 (GS100 U/H) is designed for roughing materials up to 48 HRC and 56 HRC respectively and a coolant
Features
Back To Top- The 3-flute, 30° RH helix GS100 A is suitable for the machining of aluminum, aluminum-alloys and other soft materials up to 700 N/mm²
- Reduced power requirement and cutting pressure
- Suitable for less powerful and less stable machines
- Suitable for less favorable workpiece and tool clamping conditions
- High metal removal rate thanks to the utilization of the complete cutting length
Tech Specs
Back To Top| Shank Dia (decimal) | 0.4724 |
|---|---|
| Shank Type | HB |
| Overall Length (mm) | 83 |
| Coolant | with |
| Series | 3364 |
| Decimal Diameter | 0.4724" |
| Material | Solid Carbide |
| Metric Diameter | 12.00 mm |
| Number of Flutes | 3 |
| Overall Length (decimal) | 3.2677 |
| Shank Diameter (mm) | 12 |
| Chamfer Decimal | 0.0197 |
| Brand | Guhring |
| Chamfer Metric | 0.5 |
| Length of Cut (decimal) | 0.866 |
| Helix Angle | 30° |
| Length of Cut (mm) | 22 |