- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, Carbide, FIREX Coated, with Coolant, HB Shank, 92mm Overal Length, 30° Helix Angle, 0.5 chamfer (mm)
- Item Code: 3365-16.000
- Brand: Guhring
- Unit Size: 1
Description
Slot and pocket milling often creates chip evacuation problems, especially on vertical machining centers. Re-cutting chips can cause end mill failure.
Coolant-through end millshelp evacuate chips from the cutting zone. This eliminates the problem or re-cutting chips.
Guhring offers a variety of high performance carbide roughing designs. The Rough-Tech ALU (GS100 A is designed specifically for aluminum and aluminum alloy milling, solid or coolant fed, with a coarse tooth profile. The Aero-Rough (RS100 U/F) incorporates a truncated roughing tooth profile for maximum efficiency in aerospace alloys such as stainless steel, titanium and Inconel. The Rough-tech 48/56 (GS100 U/H) is designed for roughing materials up to 48 HRC and 56 HRC respectively and a coolant
Features
Back To Top- Reduced power requirement and cutting pressure
- Suitable for less powerful and less stable machines
- Suitable for less favorable workpiece and tool clamping conditions
- High metal removal rate thanks to the utilization of the complete cutting edge length
Tech Specs
Back To Top| Chamfer Metric | 0.5 |
|---|---|
| Overall Length (mm) | 92 |
| Shank Type | HB |
| Coating/Finish | FIREX |
| Helix Angle | 30° |
| Length of Cut (decimal) | 1.26 |
| Material | Solid Carbide |
| Number of Flutes | 4 |
| Overall Length (decimal) | 3.622 |
| Series | 3365 |
| Decimal Diameter | 0.6299" |
| Metric Diameter | 16.00 mm |
| Shank Diameter (mm) | 16 |
| Brand | Guhring |
| Chamfer Decimal | 0.0197 |
| Length of Cut (mm) | 32 |
| Coolant | with |
| Shank Dia (decimal) | 0.6299 |