- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, FIREX Coated, with Coolant, HB Shank, 72mm Overal Length, 40/42° Helix Angle, 0.2 chamfer (mm)
- Item Code: 3366-10.000
- Brand: Guhring
- Unit Size: 1
Description
The RF100 F uses a specially designed flute geometry with 40°/42° variable helix angles for slotting and finishing in soft and tough steels as well as other long chipping materials up to 850 N/mm (25 HRC). FIREX® coated for additional tool life.
Slot and pocket milling often creates chip evacuation problems, especially on vertical machining centers. Re-cutting chips can cause end mill failure.
Coolant-through end millshelp evacuate chips from the cutting zone. This eliminates the problem or re-cutting chips.
Features
Back To Top- Suitable for roughing or finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs
Back To Top| Series | 3366 |
|---|---|
| Decimal Inch (dia) | 0.3937 |
| Length of Cut (decimal) | 0.866 |
| Brand | Guhring |
| Reach (mm) | 30 |
| Helix Angle | 40/42° |
| Overall Length (mm) | 72 |
| Reach (decimal) | 1.1810 |
| Chamfer Decimal | 0.0079" |
| Length of Cut (mm) | 22 |
| Material | Solid Carbide |
| Metric Diameter | 10.00 mm |
| Number of Flutes | 4 |
| Shank Diameter (mm) | 10 |
| Shank Type | HB |
| Coolant | with |
| Shank Dia (decimal) | 0.3937 |
| Chamfer Metric | 0.20 mm |
| Coating | FIREX |
| Overall Length (decimal) | 2.8346 |