- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
1/2 (.5000) 5-Flutes FC20 Coated Solid Dura-Carb Fantom 2.0 HP End Mill- .030CR
- Item Code: 37650-FULLERTON
- Brand: Fullerton
- Unit Size: 1
Description
The 3412 Fantom 2.0 is one of Fullerton Tool's advanced performance, solid carbide, 5-flute end mills specifically designed to excel in difficult machining materials. Enhanced edge strength provides a stable, robust cutter that allows heavier chip loads and produces superior part finishes. The Fantom 2.0 is recommended for machining in Steels, Stainless Steels, Super Alloys and Titanium and is highly recommended by major aerospace companies for all titanium applications.
Features
Back To Top- Square and Corner Radius End
- 5 Individually Designed Flutes
- Eccentric Relief
- Variable Index
- Single End
- Right Hand Spiral
- Right Hand Cut
- Center Cutting
- Stub, Standard, Extra Long, and Long Reach Lengths
- Standard FC-20 Coating
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: h6
- Cutter Diameter Tolerance: +.000" -.002" / +0.00 -0.05mm
Tech Specs
Back To Top| Overall Length (mm) | 101.60 |
|---|---|
| Radius Metric | 0.76 mm |
| Radius Metric | 0.76 mm |
| Direction of Cut | RH |
| Direction of Cut | RH |
| Flute Length (Decimal Inch) | 2.0000 |
| Flute Length (Inch) | 2 |
| Flute Length (Decimal Inch) | 2.0000 |
| Series | 3412 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| End Type | SE |
| End Type | SE |
| Point End Type | Corner Radius |
| Point End Type | Corner Radius |
| Coating | FC20 |
| Coolant Through | No |
| Coolant Through | No |
| Flute Length (mm) | 50.80 |
| Length | Standard |
| Flute Length (mm) | 50.80 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (Inch) | 1/2 |
| End Type Character Designation | R |
| End Type Character Designation | R |
| Flute Spiral Direction | RH |
| Flute Spiral Direction | RH |
| Fractional Cutting Diameter | 1/2" |
| Fractional Cutting Diameter | 1/2" |
| Length Designator | SD |
| Length Designator | SD |
| Weldon Flat | No |
| Weldon Flat | No |
| Brand | Fullerton |
| Brand | Fullerton |
| Metric Cutting Diameter | 12.70 mm |
| Metric Cutting Diameter | 12.70 mm |
| Metric/Inch | Inch |
| Metric/Inch | Inch |
| Overall Length (Inch) | 4 |
| Overall Length (Inch) | 4 |
| Radius Decimal | 0.0300" |
| Radius Decimal | 0.0300" |
| Decimal Cutting Diameter | 0.5000" |
| Decimal Cutting Diameter | 0.5000" |
| Overall Length (Decimal Inch) | 4.0000 |
| Overall Length (Decimal Inch) | 4.0000 |
| Number of Flutes | 5 |
| Number of Flutes | 5 |
| Shank Diameter (mm) | 12.70 |
| Shank Diameter (mm) | 12.70 |