- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
1/2 (.5000) 3-Flutes FC5 Coated Solid Dura-Carb AlumaMill G3 Vicor HP Chipbreaker End Mill- .030CR
- Item Code: 38491
- Brand: Fullerton
- Unit Size: 1
Description
The 3805 AlumaMill G3 Vicor has an advanced flute shape and relief form to produce excellent surface finishes and reduced tool pressure. The added chip breakers* provide chip control while the unique wiper geometry produces excellent floor finishes. The sinuous end gash of the G3 is ideal for agressive plunging and ramping speeds. This tool is stocked with an FC5 coating. Special variations are available uncoated in 2 weeks.
*Any 3833 AlumaMill G3 with a diameter of .25? and over can be made into a 3805 AlumaMill G3 Vicor using our 48 hour chip breaker service.
Features
Back To Top- Advanced Performance
- Radius End
- 3 Flutes
- 37.5� High Helix
- Chip Breakers
- Right Hand Spiral
- Right Hand Cut
- Standard FC-5 Coating
- Inch Based Tools
- Center Cutting
- Dura Carb (Micrograin)
- Shank Diameter: h6
- Cutter Diameter Tolerance: +.0000�� -. 0005�� / +0.000 -0.013mm
Tech Specs
Back To Top| Radius Metric | 0.76 mm |
|---|---|
| Flute Spiral Direction | RH |
| Brand | Fullerton |
| Metric/Inch | Inch |
| Overall Length (Inch) | 3 |
| Overall Length (mm) | 76.20 |
| Radius Decimal | 0.0300" |
| Series | 3805 |
| Flute Length (Decimal Inch) | 1.2500 |
| Length | Standard |
| End Type | SE |
| End Type Character Designation | R |
| Flute Length (Inch) | 1-1/4 |
| Fractional Cutting Diameter | 1/2" |
| Length Designator | SD |
| Number of Flutes | 3 |
| Overall Length (Decimal Inch) | 3.0000 |
| Point End Type | Corner Radius |
| Weldon Flat | No |
| Metric Cutting Diameter | 12.70 mm |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Coating | FC5 |
| Decimal Cutting Diameter | 0.5000" |
| Direction of Cut | RH |
| Shank Diameter (mm) | 12.70 |
| Coolant Through | No |
| Flute Length (mm) | 31.75 |
| Shank Diameter (Inch) | 1/2 |