- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
5/8 (.6250) 3-Flutes FC5 Coated Solid Dura-Carb AlumaMill G3 Vicor HP Chipbreaker End Mill- .030CR
- Item Code: 38492-FULLERTON
- Brand: Fullerton
- Unit Size: 1
Description
The 3805 AlumaMill G3 Vicor has an advanced flute shape and relief form to produce excellent surface finishes and reduced tool pressure. The added chip breakers* provide chip control while the unique wiper geometry produces excellent floor finishes. The sinuous end gash of the G3 is ideal for agressive plunging and ramping speeds. This tool is stocked with an FC5 coating. Special variations are available uncoated in 2 weeks.
*Any 3833 AlumaMill G3 with a diameter of .25? and over can be made into a 3805 AlumaMill G3 Vicor using our 48 hour chip breaker service.
Features
Back To Top- Advanced Performance
- Radius End
- 3 Flutes
- 37.5� High Helix
- Chip Breakers
- Right Hand Spiral
- Right Hand Cut
- Standard FC-5 Coating
- Inch Based Tools
- Center Cutting
- Dura Carb (Micrograin)
- Shank Diameter: h6
- Cutter Diameter Tolerance: +.0000�� -. 0005�� / +0.000 -0.013mm
Tech Specs
Back To Top| Coolant Through | No |
|---|---|
| Series | 3805 |
| Coating | FC5 |
| Direction of Cut | RH |
| Flute Length (mm) | 41.28 |
| Overall Length (Decimal Inch) | 3.5000 |
| Overall Length (mm) | 88.90 |
| Brand | Fullerton |
| Metric/Inch | Inch |
| Radius Decimal | 0.0300" |
| Radius Metric | 0.76 mm |
| Decimal Cutting Diameter | 0.6250" |
| Metric Cutting Diameter | 15.88 mm |
| End Type | SE |
| End Type Character Designation | R |
| Flute Length (Decimal Inch) | 1.6250 |
| Fractional Cutting Diameter | 5/8" |
| Number of Flutes | 3 |
| Point End Type | Corner Radius |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Shank Diameter (Inch) | 5/8 |
| Weldon Flat | No |
| Flute Spiral Direction | RH |
| Overall Length (Inch) | 3-1/2 |
| Flute Length (Inch) | 1-5/8 |
| Length | Standard |
| Length Designator | SD |
| Shank Diameter (mm) | 15.88 |