- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
5/8 (.6250) 4-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3975 Coarse Pitch Hogger
- Item Code: 39605
- Brand: Fullerton
- Unit Size: 1
Description
Fullerton's solid carbide 3975 Series Sinusoidal Hogger is designed as a rougher for high volume material removal in Steels, Steel Alloys, Stainless Steels and Hardened Steels.
Features
Back To Top- Corner Radius
- Flute Count Varies by Diameter
- 30� Helix
- Sinusoidal Geometry (Corn Cob Cutters)
- Form Relief
- Coarse Pitch
- Single End
- Right Hand Spiral
- Right Hand Cut
- Center Cutting
- Standard TiAlN Coating
- Weldon Flat
- Inch Based Tools
- Dura Carb II (Advanced Micrograin)
- Shank Diameter Tolerance: h6
- Cutter Diameter Tolerance: +.000�� -.003�� / +0.00 -0.07mm
Tech Specs
Back To Top| Radius (mm) | 1.98 |
|---|---|
| Decimal Diameter | 0.6250" |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Flute Length (Decimal Inch) | 1.5000 |
| Flute Length (Inch) | 1-1/2 |
| Series | 3975 |
| Direction of Cut | RH |
| End Type | SE |
| Point End Type | Corner Radius |
| Shank Diameter (Inch) | 5/8 |
| Shank Diameter (mm) | 15.88 |
| Brand | Fullerton |
| Fractional Diameter | 5/8" |
| Overall Length (Decimal Inch) | 3.5000 |
| Overall Length (mm) | 88.90 |
| Coolant Through | No |
| Weldon Flat | Yes |
| Length | Standard |
| Flute Length (mm) | 38.10 |
| Flute Spiral Direction | RH |
| Metric Diameter | 15.88 mm |
| Overall Length (Inch) | 3-1/2 |
| Coating/Finish | TiAlN |
| End Type Character Designation | R |
| Length Designator | SD |
| Material | Solid Carbide |
| Number of Flutes | 4 |
| Radius (Decimal Inch) | 0.0781 |