- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
3/8 (.3750) 3-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3995 Fine Pitch Hogger
- Item Code: 39610
- Brand: Fullerton
- Unit Size: 1
Description
Fullerton's solid carbide 3995 Series sinusoidal Hogger is designed as a rougher for high volume material removal. This tool excels in Titanium, Inconel, Waspaloy and other difficult-to-machine aerospace alloys.
Features
Back To Top- Corner Radius
- Flute Count Varies by Diameter
- 30� Helix
- Sinusoidal Geometry (Corn Cob Cutters)
- Form Relief
- Fine Pitch
- Single End
- Right Hand Spiral
- Right Hand Cut
- Center Cutting
- Standard TiAlN Coating
- Weldon Flat Standard
- Metric and Inch Based Tools
- Dura Carb II (Advanced Micrograin)
- Shank Diameter Tolerance: h6
- Cutter Diameter Tolerance: +.000�� -.003�� / +0.00 -0.07mm
Tech Specs
Back To Top| Radius (mm) | 1.19 |
|---|---|
| Brand | Fullerton |
| Decimal Diameter | 0.3750" |
| Overall Length (Decimal Inch) | 2.5000 |
| Direction of Cut | RH |
| Overall Length (mm) | 63.50 |
| Flute Spiral Direction | RH |
| Metric Diameter | 9.53 mm |
| Coolant Through | No |
| Flute Length (Decimal Inch) | 1.0000 |
| Flute Length (mm) | 25.40 |
| Overall Length (Inch) | 2-1/2 |
| Weldon Flat | Yes |
| Material | Solid Carbide |
| Shank Diameter (Decimal Inch) | 0.3750 |
| End Type Character Designation | R |
| Length Designator | SD |
| Number of Flutes | 3 |
| Shank Diameter (Inch) | 3/8 |
| Coating/Finish | TiAlN |
| End Type | SE |
| Fractional Diameter | 3/8" |
| Length | Standard |
| Point End Type | Corner Radius |
| Series | 3995 |
| Flute Length (Inch) | 1 |
| Radius (Decimal Inch) | 0.0470 |
| Shank Diameter (mm) | 9.53 |