- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
1 Inch Diameter Endmill, 1 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HB Shank, 5 Overall Length, 30/32° Helix Angle, 0.0315 chamfer
- Item Code: 4256-25.400
- Brand: Guhring
- Unit Size: 1
Description
The flutes with 30°/32° helix angles has an innovative roughing geometry that produces smaller chips. The RF100 U/HF design requires lower power consumption and cutting pressure especially in slotting and roughing cuts with larger cutting widths and depths.
Features
Back To Top- Low cutting pressure and power consumption
- Vibration-free operation
- Increased feed rates possible
- Increased surface qualities (R = 2-3 µm)
- Longer tool life
Tech Specs
Back To Top| Metric Diameter | 25.40 mm |
|---|---|
| Chamfer Metric | 0.8 |
| Shank Diameter | 1 |
| Overall Length | 5 |
| Series | 4256 |
| Brand | Guhring |
| Length of Cut | 2-1/4 |
| Shank Dia (decimal) | 1.0000 |
| Chamfer Decimal | 0.0315 |
| Coating/Finish | FIREX |
| Decimal Diameter | 1.0000" |
| Overall Length (decimal) | 5 |
| Overall Length (mm) | 127 |
| Helix Angle | 30/32° |
| Material | Solid Carbide |
| Number of Flutes | 4 |
| Shank Diameter (mm) | 25.4 |
| Shank Type | HB |