- 5318 Victory Drive
Indianapolis, IN 46203 - (800) 622-4824
- www.haggard-stocking.com
3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius
- Item Code: 6759-9.524
- Brand: Guhring
- Unit Size: 1
Description
NEW from Guhring - carbide end mills for ramping, roughing, slotting and drilling.
The variable helix end mill consists of unequal flute spacing at various points along the cutting length of the tool. Unequal flute spacing helps dampen vibration that is generated by the milling process. This vibration dampening permits faster feed rates and improved surface finishes when properly applied. Guhring offers a variety of variable helix designs depending on the application. Roughing end mills, finishing end mills, coolant fed as well as material specific designs are available as standard stocked items in both fractional and metric sizes.
Features
Back To Top- Optimal chip space
- Cutting Edge Preparation
- nano-Si coating
- Face Geometry for drilling and ramping
Tech Specs
Back To Top| Decimal Cutting Diameter | 0.3750" |
|---|---|
| Overall Length | 2-1/2 |
| Shank Dia (decimal) | 0.3750 |
| Shank Dia (decimal) | 0.3750 |
| Helix Angle | 36/38/37/38° |
| Series | 6759 |
| Helix Angle | 36/38/37/38° |
| Fractional Cutting Diameter | 3/8" |
| Fractional Cutting Diameter | 3/8" |
| Metric Cutting Diameter | 9.52 mm |
| Metric Cutting Diameter | 9.52 mm |
| Shank Diameter (mm) | 9.53 |
| Shank Diameter (mm) | 9.53 |
| Coating | Nano-Si |
| Coating | Nano-Si |
| Length of Cut | 7/8 |
| Overall Length (decimal) | 2.5000 |
| Length of Cut | 7/8 |
| Overall Length (mm) | 63.5 |
| Coolant | without |
| Coolant | without |
| Radius Decimal | 0.0310" |
| Shank Diameter | 3/8 |
| Radius Decimal | 0.0310" |
| Material | Solid Carbide |
| Material | Solid Carbide |
| Number of Flutes | 4 |
| Number of Flutes | 4 |
| Shank Type | HA/HB |
| Shank Type | HA/HB |
| Brand | Guhring |
| Brand | Guhring |