0.3750 in. (3/8) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

Item Code: 07028

0.2500 in. (1/4) Shank Diameter x 75 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 47675-C3

0.3750 in. (3/8) Shank Diameter x 60? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 3 Helical Flute Zplus Coated Chamfer Mill

Item Code: 59816

1/2 (.5000) 4-Flutes, Straight, Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

Item Code: 36150-FULLERTON

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 833145-C3

1/4 (.2500) 4-Flutes, Straight, Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

Item Code: 36146-FULLERTON

1/8 in. Diameter x 0.062 in. Length of Cut x 1-1/2 in. Overall Length x 90 Deg. Internal Angle Carbide Chamfer Mill

Item Code: CM18C2090U

0.3750 in. (3/8) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 72545-C3

0.2500 in. (1/4) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

Item Code: 59807-HELICAL

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 5 Helical Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 908408-C3

1/2 in. Diameter x 0.210 in. Length of Cut x 3 in. Overall Length x 90 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

Item Code: CMHP12C3090G

1/4 in. Diameter x 0.109 in. Length of Cut x 2-1/2 in. Overall Length x 82 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

Item Code: CMHP14C5082

3/8 in. Diameter x 0.153 in. Length of Cut x 2-1/2 in. Overall Length x 90 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

Item Code: CMHP38C5090

1/2 in. Diameter x 0.242 in. Length of Cut x 3 in. Overall Length x 82 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

Item Code: CMHP12C3082G

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 3 Helical Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 897208-C3

0.2500 in. (1/4) Shank Diameter x 60 Deg. Per Side 4 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 888816-C3

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 47645-C3

3-1/2 x 5 Inch, 3-Flute, 45° HSS Chamfer Mill

Item Code: A-1388

2 x 4 Inch, 3-Flute, 45° HSS Chamfer Mill

Item Code: A-1386

1-1/2 x 6 Inch, 3-Flute, 30° HSS Reverse Chamfer Mill

Item Code: CMR-1530

1-1/2 x 6 Inch, 3-Flute, 60° HSS Reverse Chamfer Mill

Item Code: CMR-1560

1/2 Inch Carbide, 2-Flute, Standard Length 60° SE Chamfer End Mill

Item Code: CMG2-1616-60

0.1875" (3/16) Shank Diameter x 60 Deg. per side 4 Helical Flutes Carbide Pointed High Performance Chamfer Mill

Item Code: V100906

0.1875" (3/16) Shank Diameter x 60 Deg. per side 4 Helical Flutes Val-Max X Coated Carbide Pointed High Performance Chamfer Mill

Item Code: V100906-X

0.3750" (3/8) Shank Diameter x 30 Deg. per side Carbide 3 Helical Flutes Flat High Performance Chamfer Mill

Item Code: V124536