0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

Item Code: 59956

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.6250 in. (1-5/8) Length of Cut x 4.0000 in. (4) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

Item Code: 59958

1/2 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes WTF Coated Endmill

Item Code: GMHT12RS7030WTF

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0200 in. Radius x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59867-HELICAL

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

Item Code: 59955

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1870 in. (3/16) Length of Cut x 0.6250 in. (5/8) Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 64508-C6

1/2 in. x 1/2 in. x 1 in. x 3 in. Solid Carbide WP15PE Weldon Shank .020 Corner Radius High Performance End Mill

Item Code: 4S0R13005NW-WP15PE

3/16 in. Diameter x 5/8 in. Length of Cut x 2 in. Overall Length x 0.015 in. Radius Carbide 5 Flutes GMX-35 Coated Endmill

Item Code: GM316R5015

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.0300 in. Radius x 1.2500 in. (1-1/4) Length of Cut x 3.0000 in. (3) Overall Length Carbide 7 Flute Tplus Coated Carbide Corner Radius Endmill

Item Code: 59957

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.2790 in. Length of Cut 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 46893-C6

3/8" (.3750) Dia., 4-Flute FC-18 Coated Dura-Carb Intimidator Series HP End Mill - .010CR

Item Code: 34409-FULLERTON

0.1250 in. (1/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 46908-C6

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.062 radius

Item Code: 6759-9.526

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.1860 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 947662-C6

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 5 Flute TPlus Coated Carbide Corner Radius Endmill

Item Code: 88317

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide 7 Flutes GMS2 Coated Endmill

Item Code: GMHTCB38RH7015

0.0310 in. (1/32) Cutter Diameter x 0.0050 in. Radius x 0.0470 in. (3/64) Length of Cut x 0.0930 in. (3/32) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 947631-C6

1/2 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.06 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHT12RS5060

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.03 in. Radius Carbide 5 Flutes GMS2 Coated Endmill

Item Code: GMHT14R5030

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0300 in. Radius x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Corner Radius Endmill

Item Code: 59862-HELICAL

0.0620 in. (1/16) Cutter Diameter x 0.0100 in. Radius x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 64462-C6

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.1400 in. (9/64) Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 64493-C6

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length x 0.06 in. Radius Carbide 4 Flutes GMX-35 Coated Endmill

Item Code: GM14R4060

3/8 Inch Diameter, 3/8 Inch LOC, 2 Inch OAL, Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill with 0.030 Radius

Item Code: 17737504A

0.0930 in. (3/32) Cutter Diameter x 0.0100 in. Radius x 0.1400 in. (9/64) Length of Cut x 0.2790 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 947693-C6