0.3750 in. (3/8) Shank Diameter x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 764245-C3

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length Carbide 6 Flutes Square WTF Coated Endmill

Item Code: GMHT38FH6WTF

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length Carbide 5 Flutes Square WTF Coated Endmill

Item Code: GMHT38FH5WTF

0.1875 in. (3/16) Cutter Diameter x 0.1875 in. (3/16) Shank Diameter x 0.6250 in. (5/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 4 Flute Tplus Coated Ball Endmill

Item Code: 83280

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 41616-C3

3/32 (.0938) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Ball/ Stub

Item Code: 32868

0.3750 in. (3/8) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flutes ALCRO-Max Coated Carbide Variable Index Square Endmill

Item Code: TC23207-TITAN

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 1.1250 in. (1-1/8) Reach 3 Flute Carbide Ball End Mill

Item Code: 970762

0.7500 in. (3/4) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute Carbide Fine Pitch Ball Rougher Endmill

Item Code: TC20748

1/2 in. Diameter 2 in. Length of Cut x 4 in. Overall Length 4 Flutes Chamfer Fine Pitch Extra Long GMX-35 Coated Rougher Endmill

Item Code: CEMR12CL4

1/4 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.03 in. Radius Carbide 7 Flutes GMS2 Coated Endmill

Item Code: GMHT14RL7030

0.0930 in. (3/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 15 RH Teeth 12 LH Teeth AlTiN Coated Carbide Deburring Undercut End Mill

Item Code: 980593-C3

0.0250 in. Cutter Diameter x 0.0750 in. Length of Cut x 0.1250 in. (1/8) Reach 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 956825-C3

1/4 in. x .1/4 in. x 1.50 in. Solid Carbide 4Fl Chamf Pl Endmill

Item Code: UEDE0250J4AH KC643M

0.0313 in. Cutter Diameter x 0.1250 in. (1/8) Length of Cut 4 Flute TiN Coated Carbide Square Endmill

Item Code: TC95637

0.0620 in. (1/16) Cutter Diameter x 0.3120 in. (5/16) Length of Cut 3 Flute Carbide Square End Mill

Item Code: 31862

0.3750 in. (3/8) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 3 Helical Flute Zplus Coated Chamfer Mill

Item Code: 59821-HELICAL

3/8 in. x 3/8 in. x 7/8 in. x 2-1/2 in. Solid Carbide WP15PE Weldon Shank .020 Corner Radius High Performance End Mill

Item Code: 4S0R10004NW-WP15PE

3/8 Inch Diameter, 3/8 Inch LOC, 2 Inch OAL, Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill

Item Code: 17737500A

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Square Endmill

Item Code: 59842-HELICAL

0.3750 in. (3/8) Cutter Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut 4 Flute Carbide Corner Radius Endmill

Item Code: TC74039

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2850 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52312-C6

0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73020-C3

1/8 Inch Solid Carbide, AlTiN Coated, 4-Flute, 1/2 LOC, 1-1/2 Inch OAL, Single End Ball Nose Endmill

Item Code: 54310-COATED

1/4 in. x 1/4 in. Solid Carbide Square End 4 Flute Weldon Endmill

Item Code: HPHV750S4225CH KCPM15