0.1000 in. Cutter Diameter x 0.7500 in. (3/4) Length of Cut x 1.2500 in. (1-1/4) Reach 3 Flute Carbide Square End Mill

Item Code: 13700-HARVEY

0.2500 in. (1/4) Cutter Diameter x 1.5000 in. (1-1/2) Length of Cut x 2.0000 in. (2) Reach 3 Flute Carbide Square End Mill

Item Code: 13716-HARVEY

0.1250 in. (1/8) Shank Diameter x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 18730-C3

0.0450 in. Cutter Diameter x 0.2250 in. Length of Cut 3 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 12745-C4

0.1000 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute TiN Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 46100-C1

0.0250 in. Cutter Diameter x 0.0750 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73025-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0600 in. Length of Cut 4 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 74320-C3

0.0120 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 46012-HARVEY

0.0600 in. Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 46060-HARVEY

0.0450 in. Cutter Diameter x 0.1350 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73045-C3

0.1250 in. (1/8) Radius x 0.3420 in. Length of Cut x 15 Deg. Per Side 2 Flute Carbide Runner Cutter

Item Code: 75108

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut 2 Flute AlTiN Coated Carbide Ball End Mill

Item Code: 24593-C3

0.1150 in. Cutter Diameter x 0.3450 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73115-C3

0.0450 in. Cutter Diameter x 0.4500 in. Length of Cut 3 Flute Carbide Tapered Square End Mill

Item Code: 27145

0.1250 in. (1/8) Radius x 0.0600 in. Pilot Diameter 2 Flute Amorphous Diamond Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 46125-C4

0.0550 in. (1.4 mm) Cutter Diameter x 0.1650 in. Length of Cut 2 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 72055-C4

0.0930 in. (3/32) Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

Item Code: 16093

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 3 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 18545-C3

0.0781 in. (5/64) Cutter Diameter x 0.2500 in. (1/4) Length of Cut x 90 Deg. Included Mill Style 2 Flute Carbide Drill/End Mill

Item Code: 15305-2

0.0937 in. (3/32) Cutter Diameter x 0.3750 in. (3/8) Length of Cut x 90 Deg. Included Mill Style 2 Flute Carbide Drill/End Mill

Item Code: 15306-2

0.0140 in. Cutter Diameter x 0.0420 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 73014-H

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73093-C3

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 18745-HARVEY

0.0300 in. Cutter Diameter x 0.0900 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 73030-C3

0.1250 in. (1/8) Radius x 0.0580 in. Pilot Diameter 2 Flute AlTiN Coated Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

Item Code: 17125-C3