0.1200 in. Cutter Diameter x 0.1800 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 50305-C3

0.1200 in. Cutter Diameter x 0.1800 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 50305-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 4 Flute Carbide Square End Mill

Item Code: 50308-HARVEY

0.1406 in. (9/64) Cutter Diameter x 0.2200 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 50309-C3

0.1406 in. (9/64) Cutter Diameter x 0.2200 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 50309-HARVEY

0.1562 in. (5/32) Cutter Diameter x 0.2810 in. (9/32) Length of Cut 4 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 50310-C4

0.2187 in. (7/32) Cutter Diameter x 0.3300 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 50314-C3

0.2187 in. (7/32) Cutter Diameter x 0.3300 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 50314-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute Amorphous Diamond Coated Carbide Square End Mill

Item Code: 50316-C4

0.3125 in. (5/16) Cutter Diameter x 0.4700 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 50320-C3

0.3125 in. (5/16) Cutter Diameter x 0.4700 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 50320-HARVEY

0.3750 in. (3/8) Cutter Diameter x 0.5700 in. Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 50324-C3

0.3750 in. (3/8) Cutter Diameter x 0.5700 in. Length of Cut 4 Flute Carbide Square End Mill

Item Code: 50324-HARVEY

0.1250 in. (1/8) Shank Diameter x 15 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 50615-C3

0.1250 in. (1/8) Shank Diameter x 20 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 50620-C3

0.1250 in. (1/8) Shank Diameter x 20 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 50620-HARVEY

0.1250 in. (1/8) Shank Diameter x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 50630-C3

0.1250 in. (1/8) Shank Diameter x 30 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 50630-HARVEY

0.1250 in. (1/8) Shank Diameter x 60 Deg. Per Side 2 Flute Carbide Pointed Chamfer Cutter

Item Code: 50660-HARVEY

0.1250 in. (1/8) Shank Diameter x 60 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 50660-C3

0.1050 in. Cutter Diameter x 0.1580 in. Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 50900-HARVEY

0.1100 in. (2.8 mm) Cutter Diameter x 0.1650 in. Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 50902-HARVEY

0.1150 in. Cutter Diameter x 0.1730 in. Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 50903-HARVEY

0.1200 in. Cutter Diameter x 0.1800 in. Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 50905-HARVEY

0.1250 in. (1/8) Cutter Diameter x 0.1870 in. (3/16) Length of Cut 2 Flute Carbide Ball End Mill

Item Code: 50908-HARVEY