0.1000 in. Cutter Diameter x 0.0100 in. Radius x 0.1500 in. Length of Cut 3 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52700-C3

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52716-C3

0.3125 in. (5/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.4700 in. Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52720-C3

0.3750 in. (3/8) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.5700 in. Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52724-C3

0.5000 in. (1/2) Cutter Diameter x 0.0300 in. Radius x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide V-Helix Corner Radius End Mill

Item Code: 52732-C3

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 5281M

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 5281M-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0310 in. (1/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52820

0.0200 in. (.5 mm) Cutter Diameter x 0.0310 in. (1/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52820-C3

0.0250 in. Cutter Diameter x 0.0470 in. (3/64) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52825

0.0250 in. Cutter Diameter x 0.0470 in. (3/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52825-C3

0.0312 in. (1/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52831-C3

0.0312 in. (1/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52831-HARVEY

0.1181 in. (3 mm) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 5283M

0.0469 in. (3/64) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52847-HARVEY

0.0625 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52862-HARVEY

0.0781 in. (5/64) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52878

0.0781 in. (5/64) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52878-C3

0.0938 in. Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52893

0.1094 in. (7/64) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52907-C3

0.1094 in. (7/64) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 52907-HARVEY

0.1406 in. (9/64) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 52909-C3

0.1406 in. (9/64) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 52909-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 52912-HARVEY

0.2187 in. (7/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 52914