1/8 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle

Item Code: 3101-3.170

3/16 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 3/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle

Item Code: 3101-4.760

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3106-10.005

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-10.010

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3106-10.015

10mm Diameter Endmill, 10mm shank, 2 flutes, 19mm Length of Cut, Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3106-10.020

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3106-12.005

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-12.010

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3106-12.015

12mm Diameter Endmill, 12mm shank, 2 flutes, 22mm Length of Cut, Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3106-12.020

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-16.010

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3106-16.015

16mm Diameter Endmill, 16mm shank, 2 flutes, 26mm Length of Cut, Carbide, HA Shank, 92mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3106-16.020

6mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3106-6.005

6mm Diameter Endmill, 6mm shank, 2 flutes, 10mm Length of Cut, Carbide, HA Shank, 57mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-6.010

8mm Diameter Endmill, 8mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3106-8.005

8mm Diameter Endmill, 8mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3106-8.010

8mm Diameter Endmill, 8mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3106-8.015

8mm Diameter Endmill, 8mm shank, 2 flutes, 16mm Length of Cut, Carbide, HA Shank, 63mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3106-8.020

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3111-10.005

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 0.8 radius (mm)

Item Code: 3111-10.008

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1 radius (mm)

Item Code: 3111-10.010

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 1.5 radius (mm)

Item Code: 3111-10.015

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, HA Shank, 72mm Overal Length, 30° Helix Angle, 2 radius (mm)

Item Code: 3111-10.020

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, HA Shank, 83mm Overal Length, 30° Helix Angle, 0.5 radius (mm)

Item Code: 3111-12.005