1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/37/38° Helix Angle, 0.0039 chamfer

Item Code: 6757-3.17

3/4 in. Diameter x 2-1/4 in. Length of Cut x 5 in. Overall Length Carbide 3 Flutes Square Endmill

Item Code: GMA34FLH3

0.3750 in. (3/8) Shank Diameter x 90? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

Item Code: 07028

0.0400 in. Cutter Diameter x 0.0050 in. Radius x 0.0600 in. Length of Cut x 0.3250 in. Reach 3 Flute AlTiN Nano Coated Carbide V-Helix Corner Radius End Mill

Item Code: 54840-C6

3/8 Inch Diameter Standard Length Solid Carbide TuffCut® General Purpose 4-Flute .02 Corner Radius End Mill

Item Code: 11137502

3/8 (.3750) TIALN Coated Dura-Carb Series 3215 2-Flute GP SE End Mill- Square

Item Code: 30665-FULLERTON

0.1875 in. (3/16) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.2810 in. (9/32) Length of Cut x 1.0000 in. (1) Reach 3 Flute Amorphous Diamond Coated Carbide Corner Radius End Mill

Item Code: 42812-C4

0.2500 in. (1/4) Shank Diameter x 75 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 47675-C3

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length Carbide 4 Flute Aplus Coated Square Endmill

Item Code: 30512-HELICAL

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 826708-C3

1 x 1 x 2-1/4 x 5 Inch Solid Carbide TiAlN Coated 4 Flute Endmill

Item Code: I4S1000T225R TIALN

1/4 (.2500) TIALN Coated Dura-Carb Series 3215 2-Flute GP SE End Mill- Square/Extra-Long

Item Code: 30112-FULLERTON

0.0780 in. (5/64) Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute AlTiN Coated Carbide Double Ended Corner Rounding End Mill

Item Code: 46078-C3

0.0310 in. (1/32) Cutter Diameter x 0.0470 in. (3/64) Length of Cut x 2 Deg. 1.0000 in. (1) Taper Reach 4 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 777231-C6

0.3750 in. (3/8) Shank Diameter x 60? Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0700 in. Tip Diameter Carbide 3 Helical Flute Zplus Coated Chamfer Mill

Item Code: 59816

0.5000 in. (1/2) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute Carbide Square Endmill

Item Code: TC10533

0.0450 in. Cutter Diameter x 0.0150 in. (1/64) Radius x 0.0680 in. Length of Cut 4 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 997945-C3

0.1090 in. (7/64) Cutter Diameter x 0.1640 in. Length of Cut 4 Flutes AlTiN Nano Coated Carbide Square Endmill

Item Code: 790802-C6

5/8 in. x 5/8 in. x 1-1/4 in. x 3-1/2 in. General Purpose Square End 2 Flute Endmill

Item Code: 2SE0625IL125A KC633M

0.0780 in. (5/64) Cutter Diameter x 0.2340 in. (15/64) Length of Cut x 0.4060 in. (13/32) Reach 7 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 940778-C6

3/16 (.1875) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Extra-Long

Item Code: 30033

1/2 (.5000) 4-Flutes, Straight, Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

Item Code: 36150-FULLERTON

0.0470 in. (3/64) Radius x 0.2500 in. (1/4) Pilot Diameter 4 Flute Carbide Double Ended Corner Rounding End Mill

Item Code: 44047-HARVEY

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 4 Flute AlTiN Coated Carbide Flat Chamfer Cutter

Item Code: 833145-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.1000 in. Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 63620-C6