.5 hp, 7° Offset, 20,000 RPM, Front Exhaust, for 1/4-3/4 Inch W x 18 Inch L (6-19 mm x 457 mm) Belts, Dynafile II Abrasive Belt Tool, for Non-Woven Nylon Belts

Item Code: 40335-DYNA

Foot Switch & Hose Assembly

Item Code: 80015

.28 hp, 12,000 RPM, 3/16 Inch (5 mm) Dia. Orbit, Rear Exhaust, 6 Inch (152 mm) Dia. Self-Generated Vacuum Dynorbital Supreme Random Orbital Sander

Item Code: 56829

.28 hp, 12,000 RPM, 3/16 Inch (5 mm) Dia. Orbit, Rear Exhaust, 5 Inch (127 mm) Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander

Item Code: 56815

.45 hp, 12,000 RPM, 3/16 Inch (5 mm) Dia. Orbit/Rotary, Rear Exhaust, 6 Inch (152 mm) Dia. DynaLocke Dual-Action Sander, Self-Generated Vacuum

Item Code: 58436

1 Inch Dia. x 3/8 Inch W x 3/8 Inch I.D., Round Radiused Face, 70 Duro Rubber Contact Wheel

Item Code: 11079-DYNA

5/8 Inch Dia. x 3/8 Inch W x 3/8 Inch I.D., Crown Face, 70 Duro Rubber Contact Wheel

Item Code: 11077-DYNA

Idler Wheel Assembly

Item Code: 11259

.25 hp, 12,000 RPM, 3/16 Inch (5 mm) Dia. Orbit, Rear Exhaust, 6 Inch (152 mm) Dia. Central Vacuum Dynorbital-Spirit Random Orbital Sander

Item Code: 59029

15,000 lb. Jack with No Pad

Item Code: 60202

.1 hp Straight-Line Pencil Grinder, 100,000 RPM, Turbine Air Motor, Rear Exhaust, 1/8 Inch Collet

Item Code: 51810

1 hp, Straight-Line, 1,800 RPM, Rear Exhaust, 5/8-11 Arbor, Dynastraight Finishing Tool

Item Code: 13521-DYNABRADE

.28 hp, 12,000 RPM, 3/16 Inch (5 mm) Dia. Orbit, Rear Exhaust, 3-1/2 Inch (89 mm) Dia. Self-Generated Vacuum Dynorbital Supreme Random Orbital Sander

Item Code: 56803

.4 hp, Straight-Line, 13/32 Inch (10 mm), 2,400 SPM, Stockade Reciprocating Filer

Item Code: 12201-DYNABRADE

.7 hp 7° Offset Die Grinder, 18,000 RPM, Gearless, Extended Rear Exhaust, Short Shank, 1/4 Inch Collet

Item Code: 52293

.7 hp Straight-Line Die Grinder, 15,000 RPM, Extended Rear Exhaust, 1/4 Inch Collet

Item Code: 52276

1.3 hp, 13,500 RPM, Rotational Exhaust, 3/8-24 Spindle Thread, 4 Inch (102 mm) Dia. Right Angle Depressed Center Wheel Grinder

Item Code: 52630

.25 hp, 12,000 RPM, 3/8 Inch (10 mm) Dia. Orbit, Rear Exhaust, 6 Inch (152 mm) Dia. Non-Vacuum Dynorbital-Spirit Random Orbital Sander

Item Code: 59010

.5 hp, Straight-Line, 18,000 RPM, Rear Exhaust, 1/4-20 Female Thread, Dynastraight Flapper 8 Inch (203 mm) Extension Finishing Tool

Item Code: 51134-DYNABRADE

.5 hp Straight-Line 7-1/4 Inch (184 mm) Extension Die Grinder, 18,000 RPM, Extended Rear Exhaust, 1/4 Inch Collet

Item Code: 53501-DYNABRADE

5/8 Inch Dia. x 1/8 Inch W, Rubber Wheel, with 1/4 Inch (6 mm) W Platen, Contact Arm Assembly for 1/4 Inch (6 mm) W x 18 Inch (457 mm) L Belts

Item Code: 11202

.25 hp, 12,000 RPM, 3/16 Inch (5 mm) Dia. Orbit, Rear Exhaust, 5 Inch (127 mm) Dia. Self-Generated Vacuum Dynorbital-Spirit Random Orbital Sander

Item Code: 59023

1 hp, Straight-Line, 3,400 RPM, Rear Exhaust, 5/8 Inch (16 mm) or 1 Inch (25 mm) Dia. Arbor, Dynastraight Finishing Tool

Item Code: 13506

Motor Tune Up Kit for 5 Inch/6 Inch Random, Dynalocke & 5 Inch Dynabuffer

Item Code: 98220

1.3 hp, 12,000 RPM, Rotational Exhaust, 5/8-11 Spindle Thread, 5 Inch (127 mm) Dia. Right Angle Depressed Center Wheel Grinder (Replaces 52620)

Item Code: 52633-DYNA