10mm Diameter Endmill, 10mm shank, 3 flutes, 19mm Length of Cut, 30 Reach (mm), Carbide, HB Shank, 72mm Overal Length, 39/40/41° Helix Angle, 0.2 chamfer (mm)

Item Code: 6702-10.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 22mm Length of Cut, 36 Reach (mm), Carbide, HB Shank, 83mm Overal Length, 39/40/41° Helix Angle, 0.24 chamfer (mm)

Item Code: 6702-12.000

20mm Diameter Endmill, 20mm shank, 3 flutes, 32mm Length of Cut, 52 Reach (mm), Carbide, HB Shank, 104mm Overal Length, 39/40/41° Helix Angle, 0.4 chamfer (mm)

Item Code: 6702-20.000

3mm Diameter Endmill, 6mm shank, 3 flutes, 8mm Length of Cut, 15 Reach (mm), Carbide, HB Shank, 57mm Overal Length, 39/40/41° Helix Angle, 0.06 chamfer (mm)

Item Code: 6702-3.000

4mm Diameter Endmill, 6mm shank, 3 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, HB Shank, 57mm Overal Length, 39/40/41° Helix Angle, 0.08 chamfer (mm)

Item Code: 6702-4.000

5mm Diameter Endmill, 6mm shank, 3 flutes, 13mm Length of Cut, 18 Reach (mm), Carbide, HB Shank, 57mm Overal Length, 39/40/41° Helix Angle, 0.1 chamfer (mm)

Item Code: 6702-5.000

6mm Diameter Endmill, 6mm shank, 3 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, HB Shank, 57mm Overal Length, 39/40/41° Helix Angle, 0.12 chamfer (mm)

Item Code: 6702-6.000

8mm Diameter Endmill, 8mm shank, 3 flutes, 16mm Length of Cut, 26 Reach (mm), Carbide, HB Shank, 63mm Overal Length, 39/40/41° Helix Angle, 0.16 chamfer (mm)

Item Code: 6702-8.000

10mm Diameter Endmill, 10mm shank, 3 flutes, 22mm Length of Cut, 38 Reach (mm), Carbide, HB Shank, 80mm Overal Length, 39/40/41° Helix Angle, 0.2 chamfer (mm)

Item Code: 6703-10.000

12mm Diameter Endmill, 12mm shank, 3 flutes, 26mm Length of Cut, 46 Reach (mm), Carbide, HB Shank, 93mm Overal Length, 39/40/41° Helix Angle, 0.24 chamfer (mm)

Item Code: 6703-12.000

20mm Diameter Endmill, 20mm shank, 3 flutes, 38mm Length of Cut, 74 Reach (mm), Carbide, HB Shank, 126mm Overal Length, 39/40/41° Helix Angle, 0.4 chamfer (mm)

Item Code: 6703-20.000

6mm Diameter Endmill, 6mm shank, 3 flutes, 13mm Length of Cut, 28 Reach (mm), Carbide, HB Shank, 65mm Overal Length, 39/40/41° Helix Angle, 0.12 chamfer (mm)

Item Code: 6703-6.000

8mm Diameter Endmill, 8mm shank, 3 flutes, 19mm Length of Cut, 38 Reach (mm), Carbide, HB Shank, 75mm Overal Length, 39/40/41° Helix Angle, 0.16 chamfer (mm)

Item Code: 6703-8.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 14mm Length of Cut, 24 Reach (mm), Carbide, FIREX Coated, HA Shank, 66mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

Item Code: 6706-10.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 16mm Length of Cut, 26 Reach (mm), Carbide, FIREX Coated, HA Shank, 73mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

Item Code: 6706-12.000