3/8 Inch Carbide, 2-Flute, Standard Length 90° SE Drill Point End Mill

Item Code: AMG-1212-DP

0.5000 in. (1/2) Cutter Diameter x 1.000 in. (1) Length of Cut x 120 Degree included Carbide AlTiN Coated 2 Flute Drill/Endmill

Item Code: DM-500-2120X

0.5000 in. (1/2) Cutter Diameter x 1.000 in. (1) Length of Cut x 90 Degree included Carbide 4 Flute Drill/Endmill

Item Code: DM-500-490

0.1875 in. (3/16) Cutter Diameter x 0.625 in. (5/8) Length of Cut x 90 Degree included Carbide 2 Flute Drill/Endmill

Item Code: DM-187-290

0.3750 in. (3/8) Cutter Diameter x 1.000 in. (1) Length of Cut x 90 Degree included Carbide 4 Flute Drill/Endmill

Item Code: DM-375-490

0.5000 in. (1/2) Cutter Diameter x 1.000 in. (1) Length of Cut x 90 Degree included Carbide 2 Flute Drill/Endmill

Item Code: DM-500-290

0.1875 in. (3/16) Cutter Diameter x 0.625 in. (5/8) Length of Cut x 90 Degree included Carbide AlTiN Coated 4 Flute Drill/Endmill

Item Code: DM-187-490X

0.3750 in. (3/8) Cutter Diameter x 1.000 in. (1) Length of Cut x 90 Degree included Carbide 2 Flute Drill/Endmill

Item Code: DM-375-290

0.3750 in. (3/8) Cutter Diameter x 1.000 in. (1) Length of Cut x 90 Degree included Carbide AlTiN Coated 2 Flute Drill/Endmill

Item Code: DM-375-290X

0.2500 in. (1/4) Cutter Diameter x 0.750 in. (3/4) Length of Cut x 90 Degree included Carbide AlTiN Coated 2 Flute Drill/Endmill

Item Code: DM-250-290X

0.1250 in. (1/8) Cutter Diameter x 0.500 in. (1/2) Length of Cut x 120 Degree included Carbide AlTiN Coated 2 Flute Drill/Endmill

Item Code: DM-125-2120X

0.1250 in. (1/8) Cutter Diameter x 0.500 in. (1/2) Length of Cut x 90 Degree included Carbide 2 Flute Drill/Endmill

Item Code: DM-125-290

0.1250 in. (1/8) Cutter Diameter x 0.500 in. (1/2) Length of Cut x 90 Degree included Carbide AlTiN Coated 2 Flute Drill/Endmill

Item Code: DM-125-290X

0.1250 in. (1/8) Cutter Diameter x 0.500 in. (1/2) Length of Cut x 120 Degree included Carbide 4 Flute Drill/Endmill

Item Code: DM-125-4120

0.1250 in. (1/8) Cutter Diameter x 0.500 in. (1/2) Length of Cut x 120 Degree included Carbide AlTiN Coated 4 Flute Drill/Endmill

Item Code: DM-125-4120X