#10 Cobalt Very Stubby Threaded Shank Drill

Item Code: 953CO10VS

15/64 Inch, 135 Degree Drill Point Angle, TiAICr/TiSi Coated, Solid Carbide Taper Length Drill Bit

Item Code: MDW02344HGS8

0.125 Diameter, 2-Flute, 5X, Coolant Fed, High Performance Cyclone Double Margin Drill (DIN6537L)

Item Code: CDACR1250

6mm Diameter Spot Drill, 2 flutes, Carbide, Weldon flat Shank, 142° Point, Right Hand Cut

Item Code: 546-6.000

0.0470 in. (3/64) Drill Diameter x 0.1410 in. Flute Length 140 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 39847-C3

10mm Diameter 7xD Drill, 2 flutes, Carbide, with Coolant, Straight Shank, 120° Point, Right Hand Cut

Item Code: 769-10.000

3.2 mm (.1260) 3XD Solid Carbide Straight Shank GoDrill Drill

Item Code: B051A03200CPG KC7325

6.4mm Diameter 5xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5511-6.400

1.6mm Diameter Taper Length Drill, 2 flutes, HSCO, Straight Shank, 130° Point, Right Hand Cut, 10/pack

Item Code: 336-1.600

0.1875 in. (3/16) Drill Diameter x 0.6250 in. (5/8) Flute Length 120 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 38212-C3

5/32 in. Cobalt Oxide/Gold Finish 135 Deg. Split Point Heavy-Duty Jobber Drill

Item Code: 010310

Drill #21 x 6 HSS Aircraft Extension

Item Code: DWDA/CX621

0.0300 in. Drill Diameter x 0.0900 in. Flute Length 140 Deg. 2 Flute AlTiN Coated Carbide Spot Drill

Item Code: 39830-C3

F Twister® HPD, 5X, 140° Point, Coolant Thru, Regular Length High Performance Drill (DIN65374L) - AlTiN Coated

Item Code: HPDCR2570A

1.1mm Diameter 5xD Drill, 2 flutes, Carbide, Bright Finish, Straight Shank, 118° Point, Right Hand Cut

Item Code: 732-1.10