2.25mm Diameter 8xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

Item Code: 6408-2.25

#54 Diameter, 7xD Drill, 2 flutes, Carbide, Super A Coated, Straight Shank, 140° Point, Right Hand Cut

Item Code: 6401-1.40

17/64 Inch Diameter, 5xD Drill, 3 flutes, Carbide, TiN Coated, Straight Shank, 150° Point, Right Hand Cut

Item Code: 609-6.75

25/64 Inch Diameter, Taper Length Drill, 2 flutes, HSS, Steam Oxide Coated, Straight Shank, 118° Point, Right Hand Cut

Item Code: 217-9.92

9.3mm Diameter Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 668-9.30

U Diameter, Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 668-9.34

9.5mm Diameter 5xD Drill, 2 flutes, Carbide, TiN Coated, Straight Shank, 140° Point, Right Hand Cut

Item Code: 1243-9.50

2.7mm Diameter 4xD Drill, 2 flutes, Carbide, Super A Coated, Straight Shank, 140° Point, Right Hand Cut

Item Code: 6400-2.70

1/16 Inch Diameter, 15xD Drill, 2 flutes, Carbide, TiAlN Coated, with Coolant, Straight Shank, 135° Point, Right Hand Cut

Item Code: 6412-1.59

1/16 Inch Diameter, 4xD Drill, 2 flutes, Carbide, Super A Coated, Straight Shank, 140° Point, Right Hand Cut

Item Code: 6400-1.59

3/8 Inch Diameter, Extra Length Drill, 2 flutes, HSS, Nitrided Lands, Straight Shank, 130° Point, Right Hand Cut

Item Code: 504-9.52

9.1mm Diameter Taper Length Drill, 2 flutes, HSS, TiN Coated, Straight Shank, 130° Point, Right Hand Cut

Item Code: 668-9.10

0.88mm Diameter Micro Drill, 2 flutes, HSS-E-PM, Bright Finish, Straight Shank, 118° Point, Right Hand Cut, 10/pack

Item Code: 301-0.88

13.8mm Diameter 5xD Drill, 2 flutes, Carbide, FIREX Coated, with Coolant, Straight Shank, 140° Point, Right Hand Cut

Item Code: 5511-13.80

10mm Diameter Spot Drill, 2 flutes, Carbide, Bright Finish, Weldon flat Shank, 142° Point, Right Hand Cut

Item Code: 546-10.00