0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 4 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 859708-C3

5/8 x 5/8 x 1-1/4 x 3-1/2 Inch TuffCut XT 4-Flute Endmill - .030CR ALtima Blaze Coated

Item Code: 27762514B

0.0190 in. Cutter Diameter x 0.0570 in. Length of Cut 3 Flute Carbide Square End Mill

Item Code: 836319

0.3125 in. (5/16) Cutter Diameter x 0.8125 in. (13/16) Length of Cut 4 Flute Carbide Square Endmill

Item Code: TC10520

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 7.0000 in. (7) Overall Length x 4.0000 in. (4) Reach Carbide 5 Flute Tplus Coated High Feed Endmill

Item Code: 83723-HELICAL

3/16 Inch Diameter, 0.01 Inch Radius, 3-Flute, Solid Carbide TiCN Coated, TuffCut® GP Corner Radius End Mill

Item Code: 11618758C

0.3750 in. (3/8) Shank Diameter x 75 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

Item Code: 72575-C3

1/4 (.2500) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Extra-Long

Item Code: 30034-FULLERTON

0.1875 in. (3/16) Cutter Diameter x 0.3750 in. (3/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

Item Code: TC29312

0.1875 in. (3/16) Cutter Diameter x 1.1250 in. (1-1/8) Length of Cut 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 12512-C3

0.0930 in. (3/32) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.1390 in. Length of Cut x 0.5000 in. (1/2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 42793-C3

3/16 (.1875) TIALN Coated Dura-Carb Series 3215 2-Flute GP SE End Mill- Square/Extra-Long

Item Code: 30111

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 3.0000 in. (3) Overall Length x 1.6250 in. (1-5/8) Reach Carbide 3 Flute Zplus Coated 40 Deg. Helix Square Endmill

Item Code: 81476-HELICAL

0.2500 in. (1/4) Cutter Diameter x 0.0150 in. (1/64) Radius x 0.7500 in. (3/4) Length of Cut 7 Flute ALCRO-Max Coated Carbide Variable Index Corner Radius Endmill

Item Code: TC64826

0.2500 in. (1/4) Cutter Diameter x 0.0100 in. Radius x 0.3750 in. (3/8) Length of Cut x 2.0000 in. (2) Reach 3 Flute AlTiN Coated Carbide Corner Radius End Mill

Item Code: 41816-C3

0.0390 in. (1 mm) Cutter Diameter x 0.1170 in. Length of Cut x 0.3250 in. Reach 4 Flute AlTiN Coated Carbide Square End Mill

Item Code: 972239-C3

16.00 mm Cutter Diameter x 16.00 mm Shank Diameter x 0.50 mm Radius x 32.00 mm Length of Cut x 89.00 mm Overall Length Carbide 4 Flute Aplus Coated Corner Radius Endmill

Item Code: 59489

0.1562 in. (5/32) Cutter Diameter x 0.2350 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 973810-C6

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 0.2500 in. (1/4) Length of Cut x 1.5000 in. (1-1/2) Overall Length Carbide 4 Flute Tplus Coated Corner Radius Endmill

Item Code: 83238

1/8 in. Diameter x 1/2 in. Length of Cut x 1-1/2 in. Overall Length Carbide 5 Flutes Square GMX-35 Coated Endmill

Item Code: GM18F5

1/8 Inch TiAlN Coated 4-Flute Ball Nose Endmill

Item Code: I4B0125T025S

3/8 TuffCut AL Series 2-Flute, 1 Inch LOC, 2-1/2 OAL, Solid Carbide Center Cutting Ball Endmill

Item Code: 135B37501

0.0620 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Length of Cut x 0.3120 in. (5/16) Reach 3 Flute Carbide Square Micro Endmill

Item Code: TC54469

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/37/38° Helix Angle, 0.0059 chamfer

Item Code: 6757-4.76

0.7500 in. (3/4) Cutter Diameter x 0.7500 in. (3/4) Shank Diameter x 0.0300 in. Radius x 1.0000 in. (1) Length of Cut x 6.0000 in. (6) Overall Length x 3.0000 in. (3) Reach Carbide 3 Flute Zplus Coated 35 Deg. Helix Corner Radius Endmill

Item Code: 82202-HELICAL