1 hp, 18,000 RPM, Rear Exhaust, 3/8-24 Spindle Thread, 4 Inch (102 mm) Dia. Straight-Line Cut-Off Wheel Tool

Item Code: 52574

1 hp, 18,000 RPM, Rear Exhaust, 3/8-24 Spindle Thread, 4 Inch (102 mm) Dia. Straight-Line 6 Inch (152 mm) Extension Cut-Off Wheel Tool

Item Code: 52580-DYNABRADE

.1 hp Straight-Line Extension Pencil Grinder, 35,000 RPM, Turbine Air Motor, Rear Exhaust, 1/8 Inch Collet

Item Code: 51756

1 Inch Dia. x 3/8 Inch W, Rubber Wheel, No Platen/Offset Design, Contact Arm Assembly for 1/4 Inch (6 mm) W or 1/2 Inch (13 mm) W x 12 Inch (305 mm) L Belts

Item Code: 15028

1 Inch Dia. x 3/8 Inch W, Tapered Rubber Wheel, No Platen/Offset Design, Contact Arm Assembly for 1/8 Inch (3 mm) W x 12 Inch (305 mm) L Belts

Item Code: 15029

.5 hp, 20,000 RPM, Rear Exhaust, 3/8-24 Spindle Thread, 3 Inch (76 mm) Dia. Straight-Line Cut-Off Wheel Tool

Item Code: 52435

.5 hp, 20,000 RPM, Front Exhaust, 3/8-24 Spindle Thread, 3 Inch (76 mm) Dia. 7° Offset Cut-Off Wheel Tool

Item Code: 52420

.7 hp, 20,000 RPM, Front Exhaust, 3/8-24 Spindle Thread, 4 Inch (102 mm) Dia. 7° Offset Cut-Off Wheel Tool

Item Code: 52431

Connector 1/4 NPT Swivel DYNASWIVEL

Item Code: 94300

3/4 Inch Dia. x 5/8 Inch W, Rubber Wheel, with 3/4 Inch (19 mm) W Platen, Contact Arm Assembly for 5/8 Inch (16 mm) W or 3/4 Inch (19 mm) W x 18 Inch (457 mm) L Belts

Item Code: 11206

.1 hp Straight-Line Extension Pencil Grinder, 60,000 RPM, Turbine Air Motor, Rear Exhaust, 1/8 Inch Collet

Item Code: 51750

.7 hp, 7° Offset, 20,000 RPM, Front Exhaust, for 1/4-1 Inch W x 18 Inch L (6-25 mm x 457 mm) Belts, Dynafile III Abrasive Belt Tool

Item Code: 15300-DYNABRADE

3/4 Inch Dia. x 1/2 Inch W, Rubber Wheel, with 1/2 Inch (13 mm) W Platen, Contact Arm Assembly for 1/2 Inch (13 mm) W x 24 Inch (610 mm) L Belts

Item Code: 11231-DYNABRADE

1 Inch Dia. x 3/8 Inch W, Tapered Rubber Wheel, with no Platen, Contact Arm Assembly for 1/8 Inch (3 mm) W or 1/4 Inch (6 mm) W x 24 Inch (610 mm) L Belts

Item Code: 11232

5/8 Inch Dia. x 3/8 Inch W, Rubber Wheel, with 1/2 Inch (13 mm) W Platen, Contact Arm Assembly for 1/2 Inch (13 mm) W x 18 Inch (457 mm) L Belts

Item Code: 11203