3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.062 radius

Item Code: 6759-9.526

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 7/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-9.524

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-4.762

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-6.354

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-6.352

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer

Item Code: 6757-7.94

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/37/38° Helix Angle, 0.0161 chamfer

Item Code: 6757-12.70

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38/37/38° Helix Angle, 0.015 radius

Item Code: 6759-3.172

3mm Diameter Endmill, 6mm shank, 2 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3679-3.000

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/38/37/38° Helix Angle, 0.031 radius

Item Code: 6759-4.764

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38° Helix Angle, 0.004 chamfer

Item Code: 3053-3.17

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 36/38/37/38° Helix Angle, 0.04 chamfer (mm)

Item Code: 6737-4.000

1/2 Inch Diameter Endmill, 5 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

Item Code: 4264-12.70

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer

Item Code: 6757-6.35

5/32 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

Item Code: 3153-3.970