0.0150 in. (1/64) Cutter Diameter x 0.0780 in. (5/64) Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 62615-C6

0.0200 in. (.5 mm) Cutter Diameter x 0.1000 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square Finisher End Mill

Item Code: 62620-C6

0.7500 in. (3/4) Cutter Diameter x 0.7500 in. (3/4) Shank Diameter x 2.2500 in. (2-1/4) Length of Cut x 5.0000 in. (5) Overall Length Carbide 4 Flute Tplus Coated Square Endmill

Item Code: 82275

1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 3 Flutes Square ZRN Coated Endmill

Item Code: GMA14F3ZRN

3/8 x 3/8 x 1/2 x 2-1/2 Inch ALtima® Blaze Coated Carbide 5-Flute TuffCut® XT End Mill

Item Code: 27837500B

0.2500 in. (1/4) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 1.0000 in. (1) Length of Cut x 3.0000 in. (3) Overall Length 7 Flute Tplus Coated Carbide Square Endmill

Item Code: 83375

1/2 in. Diameter x 1-5/8 in. Length of Cut x 4 in. Overall Length Carbide 5 Flutes Square GMS2 Coated Endmill

Item Code: GMHTCB12FLH5

0.0930 in. (3/32) Cutter Diameter x 0.2790 in. Length of Cut 4 Flute AlTiN Nano Coated Carbide V-Helix Square End Mill

Item Code: 875493-C6

5/8 in. x 5/8in. x 3/4 in. x 3 in. Solid Carbide 4 Flute Weldon Shank Sharp Edge End Mill

Item Code: W401E16008SZW WU20PE

3/8 TuffCut General Purpose, Stub Length, 2-Flute, Center Cutting, Square Endmill - TiAlN Coated

Item Code: 16437500A

5/16 Inch Diameter, 5/16 Inch LOC, 2 Inch OAL, Carbide ALtima® Coated TuffCut® XR 4-Flute Variable Helix End Mill

Item Code: 17731200A

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.7500 in. (3/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Aplus Coated Square Endmill

Item Code: 81714

0.1563 in. (5/32) Cutter Diameter x 0.5625 in. (9/16) Length of Cut 4 Flute AlTiN Coated Carbide Square Endmill

Item Code: TC99510

0.0250 in. Cutter Diameter x 0.0750 in. Length of Cut 4 Flute AlTiN Coated Carbide Square Micro Endmill

Item Code: TC58225

0.1250 in. (1/8) Cutter Diameter x 0.1250 in. (1/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length Carbide 5 Flute Tplus Coated Square Endmill

Item Code: 81840