0.0300 in. Cutter Diameter x 0.0450 in. Length of Cut x 0.2500 in. (1/4) Reach 4 Flutes AlTiN Coated Carbide Square End Mill

Item Code: 874130-C3

0.1090 in. (7/64) Cutter Diameter x 0.5700 in. Length of Cut 5 Flutes AlTiN Nano Coated Carbide Square End Mill for Hard Milling

Item Code: 885302-C6

0.0550 in. (1.4 mm) Cutter Diameter x 0.0440 in. Length of Cut 3 Flutes AlTiN Nano Coated Carbide Square End Mill for Exotic Alloys

Item Code: 888055-C6

0.0900 in. Cutter Diameter x 0.0720 in. Length of Cut 3 Flutes AlTiN Nano Coated Carbide Square End Mill for Exotic Alloys

Item Code: 888090-C6

0.0750 in. (1.9 mm) Cutter Diameter x 0.4500 in. Length of Cut 3 Flutes Carbide Square End Mill

Item Code: 894275

0.0750 in. (1.9 mm) Cutter Diameter x 0.4500 in. Length of Cut 3 Flutes AlTiN Coated Carbide Square End Mill

Item Code: 894275-C3

0.0400 in. Cutter Diameter x 0.0600 in. Length of Cut x 0.2400 in. Reach 3 Flutes AlTiN Nano Coated Carbide Square End Mill for Exotic Alloys

Item Code: 895540-C6

2.000 mm Cutter Diameter x 3.000 mm Length of Cut x 20.000 mm Reach 3 Flutes AlTiN Nano Coated Carbide Square End Mill for Exotic Alloys

Item Code: 935745-C6

0.1090 in. (7/64) Cutter Diameter x 0.1640 in. Length of Cut 7 Flutes AlTiN Nano Coated Carbide Square End Mill Finisher for Exotic Alloys

Item Code: 960102-C6

1.700 mm Cutter Diameter x 8.500 mm Length of Cut 7 Flutes AlTiN Nano Coated Carbide Square End Mill Finisher for Exotic Alloys

Item Code: 974538-C6

0.0930 in. (3/32) Cutter Diameter x 0.1390 in. Length of Cut x 0.9500 in. Reach 3 Flutes Amorphous Diamond Coated Carbide Square End Mill

Item Code: 982193-C4

0.3750 in. (3/8) Cutter Diameter x 0.5700 in. Length of Cut x 3.7500 in. (3-3/4) Reach 4 Flutes Carbide Square End Mill

Item Code: 982224

0.3750 in. (3/8) Cutter Diameter x 0.5700 in. Length of Cut x 3.7500 in. (3-3/4) Reach 4 Flutes AlTiN Coated Carbide Square End Mill

Item Code: 982224-C3

0.7500 in. (3/4) Cutter Diameter x 0.7500 in. (3/4) Shank Diameter x 0.8750 in. (7/8) Length of Cut x 3.0000 in. (3) Overall Length 4 Flutes APLUS Coated Carbide Square Endmill

Item Code: 30632W

1.0000 in. (1) Cutter Diameter x 1.0000 in. (1) Shank Diameter x 1.5000 in. (1-1/2) Length of Cut x 4.0000 in. (4) Overall Length 4 Flutes APLUS Coated Carbide Square Endmill

Item Code: 30707W