20.000 mm Cutter Diameter x 20.000 mm Shank Diameter x 40.000 mm Length of Cut x 100.000 mm Overall Length 5 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89843-HELICAL

20.000 mm Cutter Diameter x 20.000 mm Shank Diameter x 50.000 mm Length of Cut x 125.000 mm Overall Length 5 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89844

25.000 mm Cutter Diameter x 25.000 mm Shank Diameter x 50.000 mm Length of Cut x 125.000 mm Overall Length 5 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89845

25.000 mm Cutter Diameter x 25.000 mm Shank Diameter x 64.000 mm Length of Cut x 125.000 mm Overall Length 5 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89846

0.0313 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0625 in. (1/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89975

0.0313 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1250 in. (1/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89976-HELICAL

0.0469 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1250 in. (1/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89977

0.0469 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89978

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1250 in. (1/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89979-HELICAL

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.2500 in. (1/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89980

0.0781 in. (5/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89981

0.0781 in. (5/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3125 in. (5/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89982

0.0938 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89983

0.0938 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3750 in. (3/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89984

0.1094 in. (7/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3750 in. (3/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Square Endmill

Item Code: 89985