0.1880 Inch Dia. x 4.000 Inch Overall Length x 0.218 Inch Min Dia. S-Clamp RH Boring Bar

Item Code: CCBI18745R-WG

MDQN, Right Hand, -17.5 Degree Lead Angle, 1 Inch Shank Height, 1 Inch Shank Width, DNMG 432 Insert Compatability Indexable Turning Toolholder

Item Code: MDQNR164D

1/4 Inch Dia. x 4.000 Inch Overall Length x 0.296 Inch Min Dia. S-Clamp LH Boring Bar

Item Code: FCBI25045L WG

2 Inch Dia. x 1.575 Inch Length x 0.75 Inch ID 4 Flute Shell Face Mill Holder

Item Code: M1200D200Z04S075HN07

1/4 Inch Dia. x 4.000 Inch Overall Length x 0.285 Inch Min Dia. S-Clamp RH Boring Bar

Item Code: CCBI25045R-WG

1.993 Inch Max Drill Depth, 3xD, 5/8 Inch Diameter, Indexable Insert Drill

Item Code: WDX0625D3S100

49mm Max Drill Depth, 2xD, 23mm Diameter, Indexable Insert Drill

Item Code: WDX230D2S25

17/32 to 0.5709 Inch Drill Diameter, 4.961 Inch Drill Depth, 3/4 Inch Diameter, Through Coolant, Replaceable Tip Drill

Item Code: SMDH055D

3/8 Inch Dia. x 6.000 Inch Overall Length x 0.515 Inch Min Dia. S-Clamp RH Boring Bar

Item Code: GCPI37565R WG

1/2 Inch Dia. x 8.000 Inch Overall Length x 0.563 Inch Min Dia. S-Clamp LH Boring Bar

Item Code: QCBI50085L-WG

3.907 Inch Max Drill Depth, 3xD, 1-1/4 Inch Diameter, Indexable Insert Drill

Item Code: WDX1250D3S125

3/32 Inch (2.5mm) Width of Cut x 3/4 Inch Depth of Cut Right Hand Seat 2B SLS Blade

Item Code: 348105-W

2 Inch Dia. x 1.575 Inch Length x 0.75 Inch ID 6 Flute Shell Face Mill Holder

Item Code: M1200D200Z06S075HN07

16.51mm (.6500) to 17.5mm (.6890), 3XD, Replaceable Tip Drill Body

Item Code: SMDH067L

2.179 Inch Max Drill Depth, 3xD, 11/16 Inch Diameter, Indexable Insert Drill

Item Code: WDX0687D3S100