0.5000 in. (1/2) Cutter Diameter x 0.1870 in. (3/16) Width x 0.7500 in. (3/4) Neck Length 8 Flute Carbide Square Keyseat Cutter

Item Code: 22670

0.3750 in. (3/8) Cutter Diameter x 0.1250 in. (1/8) Width x 1.5000 in. (1-1/2) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19505-C3

0.1875 in. (3/16) Cutter Diameter x 0.0100 in. Radius x 60 Deg. Included 2 Flute Carbide Tip Radius Dovetail Cutter

Item Code: 16712-HARVEY

0.1875 in. (3/16) Cutter Diameter x 0.0950 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19202-C3

0.3125 in. (5/16) Cutter Diameter x 0.0620 in. (1/16) Width x 0.4680 in. (15/32) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22430-C3

0.3750 in. (3/8) Cutter Diameter x 0.0860 in. Width x 0.2500 in. (1/4) Neck Length 8 Flute Carbide Retaining Ring Keyseat Cutter

Item Code: 23528

0.5000 in. (1/2) Cutter Diameter x 0.1250 in. (1/8) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22660-C3

0.5000 in. (1/2) Cutter Diameter x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22650-C3

0.1250 in. (1/8) Cutter Diameter x 0.0780 in. (5/64) Width x 0.1870 in. (3/16) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22178-C3

0.1130 in. Cutter Diameter x 0.0310 in. (1/32) Radius x 48 Deg. Included 2 Flute Carbide Dovetail Cutter Without Drop Hole Allowance

Item Code: 23921

0.3750 in. (3/8) Cutter Diameter x 0.1870 in. (3/16) Width x 0.5620 in. (9/16) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 22570-C3

1.2500 in. (1-1/4) Cutter Diameter x 0.1250 in. (1/8) Radius 6 Flute Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 32908

1.5000 in. (1-1/2) Cutter Diameter x 0.2500 in. (1/4) Radius 6 Flute Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 32916

0.2500 in. (1/4) Shank Diameter x 0.0100 in. Flat x 30 Deg. Included 1 Flute AlTiN Coated Carbide Tipped Engraver

Item Code: 25230-C3

0.2500 in. (1/4) Shank Diameter x 0.0100 in. Flat x 60 Deg. Included 1 Flute AlTiN Coated Carbide Tipped Engraver

Item Code: 30230-C3