0.3750 in. (3/8) Cutter Diameter x 0.0250 in. Width x 1.1250 in. (1-1/8) Neck Length 8 Flute Carbide Square Keyseat Cutter

Item Code: 70307-HARVEY

0.3750 in. (3/8) Cutter Diameter x 0.0350 in. Width x 1.1250 in. (1-1/8) Neck Length 8 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 70312-C3

0.3750 in. (3/8) Cutter Diameter x 0.0350 in. Width x 1.1250 in. (1-1/8) Neck Length 8 Flute Carbide Square Keyseat Cutter

Item Code: 70312-HARVEY

0.2500 in. (1/4) Cutter Diameter x 0.0250 in. Width x 0.1250 in. (1/8) Neck Length 6 Flute AlTiN Coated Carbide Square Deep Keyseat Cutter

Item Code: 70825-C3

0.2500 in. (1/4) Cutter Diameter x 0.0300 in. Width x 0.1250 in. (1/8) Neck Length 6 Flute Carbide Square Deep Keyseat Cutter

Item Code: 70830

0.2500 in. (1/4) Cutter Diameter x 0.0300 in. Width x 0.1250 in. (1/8) Neck Length 6 Flute AlTiN Coated Carbide Square Deep Keyseat Cutter

Item Code: 70830-C3

0.3750 in. (3/8) Cutter Diameter x 0.0400 in. Width x 0.1870 in. (3/16) Neck Length 8 Flute AlTiN Coated Carbide Square Deep Keyseat Cutter

Item Code: 71115-C3

0.3750 in. (3/8) Cutter Diameter x 0.0400 in. Width x 0.1870 in. (3/16) Neck Length 8 Flute Carbide Square Deep Keyseat Cutter

Item Code: 71115-HARVEY

0.3125 in. (5/16) Cutter Diameter x 0.1260 in. Width x 1.6250 in. (1-5/8) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 71772

0.3125 in. (5/16) Cutter Diameter x 0.1260 in. Width x 1.6250 in. (1-5/8) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 71772-C3

0.2362 in. (6 mm) Cutter Diameter x 0.1180 in. Width x 0.6250 in. (5/8) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 72662-C3

0.2362 in. (6 mm) Cutter Diameter x 0.1180 in. Width x 0.6250 in. (5/8) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 72662-HARVEY

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Flat x 90 Deg. Included 1 Flute Carbide Tipped Engraver De

Item Code: 818208

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Flat x 90 Deg. Included 1 Flute AlTiN Coated Carbide Tipped Engraver De

Item Code: 818208-C3

0.1250 in. (1/8) Shank Diameter x 0.0050 in. Radius x 90 Deg. Included 1 Flute Carbide Radius Engraver De

Item Code: 818308