0.5000 in. (1/2) Cutter Diameter x 0.2075 in. Width x 0.3750 in. (3/8) Neck Length 6 Flute TiB2 Coated Carbide Picatinny Attachment Cutters

Item Code: 859232-C8

0.6250 in. (5/8) Cutter Diameter x 0.2075 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute TiB2 Coated Carbide Picatinny Attachment Cutters

Item Code: 859240-C8

0.2500 in. (1/4) Cutter Diameter x 0.0200 in. Width x 0.3750 in. (3/8) Neck Length 8 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 860120-C6

0.2060 in. Cutter Diameter x 0.0100 in. Radius x 0.1180 in. Length of Cut 3 Flute TiB2 Coated Carbide Picatinny Recoil Groove End Mills

Item Code: 862606-C8

0.2100 in. Cutter Diameter x 0.0100 in. Radius x 0.1180 in. Length of Cut 3 Flute TiB2 Coated Carbide Picatinny Recoil Groove End Mills

Item Code: 862610-C8

0.2060 in. Cutter Diameter x 0.1180 in. Length of Cut 3 Flute TiB2 Coated Carbide Picatinny Recoil Groove End Mills

Item Code: 864806-C8

0.2100 in. Cutter Diameter x 0.1180 in. Length of Cut 3 Flute TiB2 Coated Carbide Picatinny Recoil Groove End Mills

Item Code: 864810-C8

0.1875 in. (3/16) Shank Diameter x 0.0050 in. Flat x 60 Deg. Included 2 Flute AlTiN Nano Coated Carbide Tipped Engraver For Hardened Steels

Item Code: 866712-C6

0.2500 in. (1/4) Shank Diameter x 0.0050 in. Flat x 60 Deg. Included 2 Flute AlTiN Nano Coated Carbide Tipped Engraver For Hardened Steels

Item Code: 866716-C6

0.1250 in. (1/8) Cutter Diameter x 0.0200 in. Width x 0.1870 in. (3/16) Neck Length 8 Flute AlTiN Nano Coated Carbide Square Keyseat Cutter for Hardened Steels

Item Code: 867420-C6

0.1875 in. (3/16) Shank Diameter x 0.0100 in. Radius x 90 Deg. Included 2 Flute AlTiN Nano Coated Carbide Radius Engraver For Hardened Steels

Item Code: 869412-C6

0.2060 in. Cutter Diameter x 0.0050 in. Radius x 0.1180 in. Length of Cut 3 Flute TiB2 Coated Carbide Picatinny Recoil Groove End Mills

Item Code: 874406-C8

0.2100 in. Cutter Diameter x 0.0050 in. Radius x 0.1180 in. Length of Cut 3 Flute TiB2 Coated Carbide Picatinny Recoil Groove End Mills

Item Code: 874410-C8

0.6250 in. (5/8) Cutter Diameter x 0.3130 in. Width 8 Flute Carbide Reduced Shank Pointed Double Angle Shank Cutter

Item Code: 875515

0.6250 in. (5/8) Cutter Diameter x 0.3130 in. Width 8 Flute AlTiN Coated Carbide Reduced Shank Pointed Double Angle Shank Cutter

Item Code: 875515-C3