0.2362 in. (6 mm) Cutter Diameter x 0.1250 in. (1/8) Width x 0.3540 in. Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 947595-C3

0.5000 in. (1/2) Cutter Diameter x 0.0100 in. Radius x 45 Deg. Included 3 Flute Carbide Tip Radius Dovetail Cutter

Item Code: 928432

0.1250 in. (1/8) Shank Diameter x 0.0100 in. Radius x 120 Deg. Included 2 Flute AlTiN Coated Carbide Marking Cutter

Item Code: 961960-C3

0.1250 in. (1/8) Shank Diameter x 30 Deg. Included 2 Flute Carbide Marking Cutter For Non-Ferrous

Item Code: 902915

1.0000 in. (1) Cutter Diameter x 0.0787 in. Radius 6 Flute AlTiN Coated Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 3292M-C3

0.7500 in. (3/4) Cutter Diameter x 0.0100 in. Radius x 90 Deg. Included 4 Flute Carbide Tip Radius Dovetail Cutter

Item Code: 16848

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Width x 0.1870 in. (3/16) Neck Length 4 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 946903-C3

0.1875 in. (3/16) Cutter Diameter x 0.0780 in. (5/64) Width x 0.2810 in. (9/32) Neck Length 6 Flute Carbide Square Keyseat Cutter

Item Code: 22278

0.5000 in. (1/2) Cutter Diameter x 0.0050 in. Radius x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 8 Flute AlTiN Coated Carbide Corner Radius Stagger Keyseat Cutter

Item Code: 44350-C3

0.7500 in. (3/4) Cutter Diameter x 0.0625 in. (1/16) Radius 6 Flute AlTiN Coated Carbide Full Radius Reduced Shank Keyseat Cutter

Item Code: 32904-C3

0.1250 in. (1/8) Shank Diameter x 0.0100 in. Flat x 30 Deg. Included 1 Flute AlTiN Coated Carbide Tipped Engraver

Item Code: 25210-C3

0.2500 in. (1/4) Cutter Diameter x 0.0930 in. (3/32) Width x 0.7500 in. (3/4) Neck Length 6 Flute AlTiN Coated Carbide Square Keyseat Cutter

Item Code: 43993-C3

0.1875 in. (3/16) Cutter Diameter x 90 Deg. Included 2 Flute Carbide Pointed Dovetail Cutter

Item Code: 992012

0.3750 in. (3/8) Cutter Diameter x 0.0930 in. (3/32) Width x 0.5620 in. (9/16) Neck Length 6 Flute Carbide Square Keyseat Cutter for Non-Ferrous

Item Code: 975250

0.1875 in. (3/16) Cutter Diameter x 0.0950 in. Width x 0.7500 in. (3/4) Neck Length 4 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 19502-HARVEY