0.3750 in. (3/8) Cutter Diameter x 0.1250 in. (1/8) Width x 0.7500 in. (3/4) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 807324-C3

0.7500 in. (3/4) Cutter Diameter x 0.0930 in. (3/32) Width 10 Flute AlTiN Coated Carbide Square Reduced Shank Deep Stagger Keyseat Cutter

Item Code: 773550-C3

0.2500 in. (1/4) Shank Diameter x 0.0150 in. (1/64) Flat x 60 Deg. Included 1 Flute Carbide Tipped Engraver

Item Code: 18232-HARVEY

0.2500 in. (1/4) Shank Diameter x 0.0150 in. (1/64) Flat x 60 Deg. Included 1 Flute AlTiN Coated Carbide Tipped Engraver

Item Code: 18232-C3

0.1250 in. (1/8) Cutter Diameter x 0.0620 in. (1/16) Width x 0.1870 in. (3/16) Neck Length 4 Flute AlTiN Nano Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19201-C6

0.1875 in. (3/16) Cutter Diameter x 0.0950 in. Width x 0.3120 in. (5/16) Neck Length 4 Flute AlTiN Nano Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19202-C6

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Width x 0.3120 in. (5/16) Neck Length 4 Flute AlTiN Nano Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19203-C6

0.3750 in. (3/8) Cutter Diameter x 0.1250 in. (1/8) Width x 0.5000 in. (1/2) Neck Length 6 Flute AlTiN Nano Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19205-C6

0.5000 in. (1/2) Cutter Diameter x 0.1880 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute AlTiN Nano Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19210-C6

0.3930 in. Cutter Diameter x 0.1330 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 19279

0.3930 in. Cutter Diameter x 0.1330 in. Width x 0.5000 in. (1/2) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19279-C3

0.3930 in. Cutter Diameter x 0.1330 in. Width x 1.5000 in. (1-1/2) Neck Length 6 Flute Carbide Pointed Double Angle Shank Cutter

Item Code: 19579

0.3930 in. Cutter Diameter x 0.1330 in. Width x 1.5000 in. (1-1/2) Neck Length 6 Flute AlTiN Coated Carbide Pointed Double Angle Shank Cutter

Item Code: 19579-C3

0.3750 in. (3/8) Shank Diameter x 90 Deg. Included 2 Flute Carbide Marking Cutter

Item Code: 23600

0.3750 in. (3/8) Shank Diameter x 90 Deg. Included 2 Flute AlTiN Coated Carbide Marking Cutter

Item Code: 23600-C3