4 Inch - 20 Inch, 0.001 Inch, Mechanical Extention Rod Type Inside Micrometer, Extention Rods (1 Inch, 2 Inch, 4 Inch, 8 Inch)

Item Code: 139-178

4 Inch - 36 Inch, 0.001 Inch, Mechanical Extention Rod Type Inside Micrometer, Extention Rods (1 Inch, 2 Inch, 4 Inch, 8 Inch, 16 Inch)

Item Code: 139-179

8 Inch - 9 Inch, 0.001 Inch, Mechanical Extention Rod Type Inside Micrometer

Item Code: 141-010

2-3 Inch, .001 Inch, Mechanical Caliper Jaw Type Micrometer, Carbide Steel Tip, Locking Clamp, Ratchet Stop, With Standard

Item Code: 145-195

0 Inch -1 Inch Outside Diameter, 0.055 Inch - 1.05 Inch Inside Diameter, 0.001 Inch, Mechanical Groove Micrometer, 0.5 Inch Diameter Flange, Non-Rotating Spindle

Item Code: 146-232

0-6.5mm, 0.01mm, Mechanical Micrometer Head, Ultra-Small, 6mm Diameter Plain Stem, Flat Spindle Face

Item Code: 148-201

1/4 Inch - 0 Inch, 0.001 In, Mechanical Micrometer Head, 1/4 In Diameter Plain Stem, Flat Spindle Face, Reverse Read

Item Code: 148-210

0 Inch - 1/2 Inch, 0.001 In, Mechanical Micrometer Head, 3/8 Inch Diameter Plain Stem, Flat Spindle Face, Zero-Adjust Thimble

Item Code: 148-501

0-13mm, 0.01mm, Mechanical Micrometer Head, 9.5mm Diameter Plain Stem, Flat Spindle Face, Spindle Lock, Zero-Adjust Thimble

Item Code: 148-503

0-13mm, 0.01mm, Mechanical Micrometer Head, 9.5mm Diameter Stem with Clamp Nut, Flat Spindle Face, Spindle Lock, Zero-Adjust Thimble

Item Code: 148-504

0 Inch- 1/2 Inch, 0.001 Inch, Mechanical Micrometer Head, 3/8 Inch Diameter Plain Stem, Flat Spindle Face, Spindle Lock, Zero-Adjust Thimble

Item Code: 148-505

0-13mm, 0.01mm, Mechanical Micrometer Head, 9.5mm Diameter Stem with Clamp Nut, Flat Spindle Face, Zero-Adjust Thimble

Item Code: 148-508

0 Inch - 1/2 Inch, 0.001 In, Mechanical Micrometer Head, 3/8 Inch Diameter Plain Stem, Spherical (SR4) Spindle Face, Zero-Adjust Thimble

Item Code: 148-851

0 Inch - 1/2 Inch, 0.001 Inch, Mechanical Micrometer Head, 3/8 Inch Diameter Stem with Clamp Nut, Spherical (SR4) Spindle Face, Zero-Adjust Thimble

Item Code: 148-852

0-13mm, 0.01mm, Mechanical Micrometer Head, 9.5mm Diameter Plain Stem, Spherical (SR4) Spindle Face, Spindle Lock, Zero-Adjust Thimble

Item Code: 148-853