0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.1000 in. Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 947020

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.1000 in. Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 947020-C8

0.0250 in. Cutter Diameter x 0.0370 in. Length of Cut x 0.1250 in. (1/8) Reach 3 Flute Carbide V-Helix Ball End Mill

Item Code: 947025

0.0250 in. Cutter Diameter x 0.0370 in. Length of Cut x 0.1250 in. (1/8) Reach 3 Flute TiB2 Coated Carbide V-Helix Ball End Mill

Item Code: 947025-C8

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 95111M

0.0394 in. (1 mm) Cutter Diameter x 0.0780 in. (5/64) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 95111M-C3

0.0312 in. (1/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 951131

0.0312 in. (1/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951131-C3

0.0469 in. (3/64) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute Carbide Undercutting End Mill

Item Code: 951147

0.0469 in. (3/64) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951147-C3

0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 951210

0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 951210-C3

0.1562 in. (5/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute TiB2 Coated Carbide Undercutting End Mill

Item Code: 951210-C8

0.1562 in. (5/32) Cutter Diameter x 0.6250 in. (5/8) Neck Length x 300 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 952310

0.1562 in. (5/32) Cutter Diameter x 0.6250 in. (5/8) Neck Length x 300 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 952310-C3