25.000 mm Cutter Diameter x 25.000 mm Shank Diameter x 64.000 mm Length of Cut x 125.000 mm Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89820

0.0313 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.0938 in. Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89958

0.0313 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1563 in. (5/32) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89959

0.0469 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1563 in. (5/32) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89960

0.0469 in. (3/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.2500 in. (1/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89961

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89962-HELICAL

0.0625 in. (1/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3125 in. (5/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89963

0.0781 in. (5/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.2500 in. (1/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89964

0.0781 in. (5/64) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3750 in. (3/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89965

0.0938 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.2813 in. Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89966

0.0938 in. Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89967

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.2500 in. (1/4) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89968

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3750 in. (3/8) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89969

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89970

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.3125 in. (5/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length 4 Flutes TPLUS Coated Carbide Ball Endmill

Item Code: 89971