14mm Diameter Endmill, 14mm shank, 4 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 83mm Overal Length, 30° Helix Angle

Item Code: 3727-14.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 30° Helix Angle

Item Code: 3727-16.000

18mm Diameter Endmill, 18mm shank, 4 flutes, 32mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 30° Helix Angle

Item Code: 3727-18.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, Carbide, FIREX Coated, HA Shank, 104mm Overal Length, 30° Helix Angle

Item Code: 3727-20.000

4mm Diameter Endmill, 4mm shank, 4 flutes, 11mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 30° Helix Angle

Item Code: 3727-4.000

5mm Diameter Endmill, 5mm shank, 4 flutes, 13mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 30° Helix Angle

Item Code: 3727-5.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3727-6.000

2mm Diameter Endmill, 6mm shank, 2 flutes, 3mm Length of Cut, 28 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-2.000

3mm Diameter Endmill, 6mm shank, 2 flutes, 3.5mm Length of Cut, 33 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-3.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 6mm Length of Cut, 9 Reach (mm), Carbide, nano-Si Coated, HA Shank, 57mm Overal Length, 30° Helix Angle

Item Code: 3848-6.000

8mm Diameter Endmill, 8mm shank, 2 flutes, 7mm Length of Cut, 9.4 Reach (mm), Carbide, nano-Si Coated, HA Shank, 63mm Overal Length, 30° Helix Angle

Item Code: 3848-8.000

4mm Diameter Endmill, 6mm shank, 2 flutes, 4mm Length of Cut, 25 Reach (mm), Carbide, nano-Si Coated, HA Shank, 80mm Overal Length, 30° Helix Angle

Item Code: 3849-4.000

6mm Diameter Endmill, 8mm shank, 2 flutes, 6mm Length of Cut, 25 Reach (mm), Carbide, nano-Si Coated, HA Shank, 120mm Overal Length, 30° Helix Angle

Item Code: 3853-6.000

6mm Diameter Endmill, 6mm shank, 2 flutes, 12mm Length of Cut, Carbide, nano-Si Coated, HA Shank, 100mm Overal Length, 30° Helix Angle

Item Code: 3866-6.000

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-3/4 Overall Length, 36/38° Helix Angle

Item Code: 4261-11.110