1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle

Item Code: 4261-12.700

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle

Item Code: 4261-15.870

1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle

Item Code: 4261-25.400

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle

Item Code: 4261-3.170

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle

Item Code: 4261-4.760

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, nano-A Coated, HA Shank, 72mm Overal Length, 36/38° Helix Angle

Item Code: 6707-10.000

12mm Diameter Endmill, 12mm shank, 4 flutes, 26mm Length of Cut, 36 Reach (mm), Carbide, nano-A Coated, HA Shank, 83mm Overal Length, 36/38° Helix Angle

Item Code: 6707-12.000

16mm Diameter Endmill, 16mm shank, 4 flutes, 32mm Length of Cut, 42 Reach (mm), Carbide, nano-A Coated, HA Shank, 92mm Overal Length, 36/38° Helix Angle

Item Code: 6707-16.000

20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, 52 Reach (mm), Carbide, nano-A Coated, HA Shank, 104mm Overal Length, 36/38° Helix Angle

Item Code: 6707-20.000

25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, nano-A Coated, HA Shank, 121mm Overal Length, 36/38° Helix Angle

Item Code: 6707-25.000

4mm Diameter Endmill, 6mm shank, 4 flutes, 11mm Length of Cut, 18 Reach (mm), Carbide, nano-A Coated, HA Shank, 57mm Overal Length, 36/38° Helix Angle

Item Code: 6707-4.000

5mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 18 Reach (mm), Carbide, nano-A Coated, HA Shank, 57mm Overal Length, 36/38° Helix Angle

Item Code: 6707-5.000

6mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 20 Reach (mm), Carbide, nano-A Coated, HA Shank, 57mm Overal Length, 36/38° Helix Angle

Item Code: 6707-6.000

8mm Diameter Endmill, 8mm shank, 4 flutes, 19mm Length of Cut, 26 Reach (mm), Carbide, nano-A Coated, HA Shank, 63mm Overal Length, 36/38° Helix Angle

Item Code: 6707-8.000

10mm Diameter Endmill, 10mm shank, 4 flutes, 22mm Length of Cut, 30 Reach (mm), Carbide, nano-A Coated, HB Shank, 72mm Overal Length, 36/38° Helix Angle

Item Code: 6708-10.000