1/4 in. Diameter x 3/4 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill

Item Code: GM14B4

3/32 Inch Diameter Solid Carbide Altima 52 Coated Center Cutting TuffCut DM® 2-Flute Ball Nose End Mill

Item Code: 15609370A

1/2 in. Diameter x 2-1/2 in. Length of Cut x 5 in. Overall Length Carbide 3 Flutes Ball Nose ZrN Coated Endmill

Item Code: GMA12BSL3ZRN

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 220 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 826708-C3

0.0200 in. (.5 mm) Cutter Diameter x 0.0300 in. Length of Cut x 0.1000 in. Reach 4 Flute AlTiN Nano Coated Carbide V-Helix Ball End Mill

Item Code: 63620-C6

0.1870 in. Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 4 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 897712-C3

2.000 Mm Cutter Diameter x 1.600 Mm Length of Cut x 10.000 Mm Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 881745-C6

1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle

Item Code: 3159-3.170

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.6250 in. (5/8) Length of Cut x 4.0000 in. (4) Overall Length x 2.2500 in. (2-1/4) Reach Carbide 4 Flute TPLUS Coated Ball Endmill

Item Code: 86894

4 mm Diameter x 12 mm Length of Cut x 50 mm Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill

Item Code: GM0400MMB4

0.0780 in. (5/64) Cutter Diameter x 0.0620 in. (1/16) Length of Cut x 0.7810 in. (25/32) Reach 2 Flute AlTiN Nano Coated Carbide Ball End Mill

Item Code: 919178-C6

0.0938 in. Cutter Diameter x 0.3750 in. (3/8) Neck Length x 220 Deg. 2 Flute AlTiN Coated Carbide Undercutting End Mill

Item Code: 22806-C3

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill

Item Code: GM38BL4

1/8 in. Diameter x 3/8 in. Length of Cut x 1-1/2 in. Overall Length Carbide 4 Flutes Ball Nose GMX-35 Coated Endmill

Item Code: GM18BH4

3/8 in. Diameter x 1 in. Length of Cut x 2-1/2 in. Overall Length Carbide 3 Flutes Ball Nose ZrN Coated Endmill

Item Code: GMA38BHL3ZRN