0.3125 in. (5/16) Cutter Diameter x 300&deg 6 Flutes Carbide Reduce Shank Undercut Endmill

Item Code: 947420

0.3125 in. (5/16) Cutter Diameter x 300&deg 6 Flutes AlTiN Coated Carbide Reduce Shank Undercut Endmill

Item Code: 947420-C3

0.500 mm Cutter Diameter x 0.750 mm Length of Cut 3 Flutes AlTiN Nano Coated Carbide Ball Endmill

Item Code: 968011-C6

5.000 mm Cutter Diameter x 15.000 mm Length of Cut 4 Flutes AlTiN Nano Coated Carbide Ball Endmill

Item Code: 975364-C6

0.6250 in. (5/8) Cutter Diameter x 1.0000 in. (1) Neck Length x 300&deg 4 Flutes Carbide Undercutting Endmill

Item Code: 984040

0.6250 in. (5/8) Cutter Diameter x 1.0000 in. (1) Neck Length x 300&deg 4 Flutes AlTiN Coated Carbide Undercutting Endmill

Item Code: 984040-C3

3/16 Inch Diameter Endmill, 3/16 Shank, 2 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3160-4.76

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3167-6.35

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3166-4.76

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3167-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3165-12.70

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3165-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3101-12.70

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3101-6.35

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, Ball Nose

Item Code: 3165-3.17