0.5000 in. (1/2) Cutter Diameter x 0.7500 in. (3/4) Neck Length x 270 Deg. 8 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 819932-C6

0.0312 in. (1/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 4 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823231-C6

0.0469 in. (3/64) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 4 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823247-C6

0.0625 in. (1/16) Cutter Diameter x 0.0930 in. (3/32) Neck Length x 270 Deg. 4 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823262-C6

0.0781 in. (5/64) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 4 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823278-C6

0.0937 in. (3/32) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 4 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823293-C6

0.1250 in. (1/8) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 6 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823308-C6

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Neck Length x 270 Deg. 6 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823312-C6

0.2500 in. (1/4) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 6 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823316-C6

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Neck Length x 270 Deg. 8 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823324-C6

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Neck Length x 270 Deg. 8 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 823332-C6

0.0625 in. (1/16) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 4 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 831562-C6

0.0937 in. (3/32) Cutter Diameter x 0.0620 in. (1/16) Neck Length x 270 Deg. 4 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 831593-C6

0.2500 in. (1/4) Cutter Diameter x 0.1250 in. (1/8) Neck Length x 270 Deg. 8 Flute AlTiN Nano Coated Carbide Undercutting End Mill for Hardened Steels

Item Code: 831616-C6

0.1250 in. (1/8) Cutter Diameter x 0.7500 in. (3/4) Neck Length x 220 Deg. 4 Flute Carbide Undercutting End Mill

Item Code: 833808