KA-13 Counter 3-axis display unit for Linear Scales

Item Code: 174-185A

TM-510 Toolmaker's Microscope, 30X Magnification, 4 Inch X 2 Inch Stage Travel, With Digimatic Mic Heads

Item Code: 176-819A

TM-505 Toolmaker's Microscope, 30X Magnification, 2 Inch X 2 Inch Stage Travel

Item Code: 176-820A

TM-510 Toolmaker's Microscope, 30X Magnification, 4 Inch X 2 Inch Stage Travel

Item Code: 176-821A

Manual Column Stand, 10 Inch/250mm Vertical Travel, For SJ-210 and SJ-310 Surface Roughness Tester, Granite Base

Item Code: 178-029

4mN, 90 degree 10 Micron Stylus Tip, Replacement Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard and Retractable Drive Unit Models

Item Code: 178-391

4mN, 90 degree 5 Micron Stylus Tip, Replacement Small Hole Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard, Retractable and Transverse Drive Unit Models, 4.5mm Diameter Minimum Hole Size

Item Code: 178-392

4mN, 90 degree 5 Micron Stylus Tip, Replacement Deep Groove Detector for SJ-410 and SJ-310 Surface Roughness Tester Standard and Retractable Drive Unit Models, Not for Transverse Type Models

Item Code: 178-394

.75mN, 60 degree 2 Micron Stylus Tip, Replacement Low-Force Detector for SJ-410 Surface Roughness Tester Models

Item Code: 178-396-2

4mN, 90 degree 5 Micron Stylus Tip, Replacement Detector for SJ-410 Surface Roughness Tester Models

Item Code: 178-397

Reticle #14 for Pocket Comparator

Item Code: 183-115

0.05-1mm, 150mm Length, Thickness Gage Set, 20 Leaves (0.05-1mm by 0.05mm)

Item Code: 184-304S

0.05-1mm, 100mm Length, Thickness Gage Set, 13 Leaves (0.05-0.3mm by 0.05mm, 0.4-1mm by 0.15mm)

Item Code: 184-305S

0.4-6mm, Concave/Convex Radius Gage Set, 18 Pairs of Leaves (0.4, 0.8, 1, 1.2, 1.6mm, 1.75 to 3mm by 0.25mm, 3.5 to 6mm by 0.5mm), Locking Clamp

Item Code: 186-110

0.4-6mm, Concave/Convex Radius Gage Set, 26 Pairs of Leaves ( 0.5 to 13mm by 0.5mm), Locking Clamp

Item Code: 186-902

0.35-6mm, 60 Degrees, Screw Pitch Gage Set, 22 Leaves (0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 1, 1.25, 1.5, 1.75, 2-6 by 0.5mm) (60 Degree Angle Gage)

Item Code: 188-130

4-56 TPI/0.5-6mm, 60 Degrees, Screw Pitch Gage Set, 28 Leaves (4, 6, 8, 10, 11, 11.5 12, 13, 16, 20, 28, 32, 40, 56 TPI) ( 0.5, 0.75, 1, 1.23, 1.5, 1.75, 2-5 by 0.5, 6mm)

Item Code: 188-152

0.25-2.5mm, 60 Degrees, Screw Pitch Gage Set, 28 Leaves (0.25- 0.9 by 0.05, 1, 1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6, 1.7, 1.75, 1.8, 1.9, 2, 2.5mm)

Item Code: 188-153

0.001mm, 0.1mm/0.14mm Dial Indicator, 50-0-50, Lug Back, 3/8 Inch stem,Series 1, Compact One Rev, Shockproof, Jeweled

Item Code: 1900S-10

0.01mm, 30mm/(1mm per rev) Dial Indicator, 0-100, Flat Back, 8mm stem, Series 2, Shockproof, Jeweled, Damper

Item Code: 2052SB-19

0.01mm, 25mm/(1mm per rev) Dial Indicator, 0-100, Flat Back, 3/8 Inch stem, Series 2

Item Code: 2056SB-01

.80-1.6 Inch, .0005 Inch, Dial Caliper Gage

Item Code: 209-354

Data Input Tool, RS-232C connector, data send button

Item Code: 264-007

.0005 Inch, .125 Inch/(.05 Inch per rev), Dial Indicator,0-25-0, Flat Back, 3/8 Inch stem, Series 2

Item Code: 2922SB

25-50mm, .001mm, IP65 Digimatic Outside Micrometer, With SPC Data Output, Ratchet Stop, With Standard

Item Code: 293-231-30